Regular

fixxxer113

Recent posts

New "RPS ON" script for Windows 10/11 in Fantom-S and Fantom-X · 30 Sep 2024

Hello all! Don't know if anyone is still struggling with this, but I recently tried to use the suggested DOS batch commands from this post https://forums.rolandclan.com/viewtopic.php?f=3&t=11152 in Windows 10. As a remin...

Tapping solos using the ribbon in Keytars & AX Synths · 13 Mar 2017

Hey guys! Does anyone know if there is a way to configure the ribbon controller so that when you play a note and then touch it, the sound will jump straight to the corresponding pitch? So you can use it for tapping.

Re: technical challenge... in Fantom-S and Fantom-X · 30 Mar 2016

Set up your split in performance mode. Then, go into "part view" and then "pitch". Among other settings, that screen will give you the option to set separate fine, coarse and octave transpose for each part. You should do...

Re: Wobbly pots in Fantom-S and Fantom-X · 10 Jun 2015

I too have a tale of wobbliness to share. I bought my Fantom used in 2008 so it was already about 4 years old. Pots were a bit wobbly, if you shook them, but I thought that they are like that anyway. Never had an issue,...

Re: Control of pads with external controller (aka e-kit) in Fantom-S and Fantom-X · 9 Feb 2015

Is your e-kit set to transmit on MIDI channel 10? That's the default channel the pads work on.

Re: Fantom X6 Sample Memory Upgrade in Fantom-S and Fantom-X · 26 Jan 2015

I actually use 1GB of RAM on my X6 and it works fine. Most PC100 or PC133 DIMMs should work, but I suggest buying one that specifically states compatibility with the Fantom just to be sure. Ebay example: http://www.ebay....

Re: AX Synth & Beheringer FCB1010 - HELP!!!!!!!! in Keytars & AX Synths · 13 Jun 2014

From what the manual says, it seems that this is possible. It is mentioned that the AX-Synth can receive bank select and program change messages. As with barnbys issue, this might be a midi channel problem. When you have...

Re: Just built wireless MIDI into my AX Synth in Keytars & AX Synths · 8 Jun 2014

Hey Arjan, great work on that mod! Thanks for attempting this, testing it and sharing your results! I just finished the same mod on my AX after reading your post. I went for a different solution for switching the wireles...

Re: Control pedal skips live sets in Fantom-S and Fantom-X · 16 May 2014

After a loooooong wait due to some problem with the local Roland distributor, I finally received the DP-2 and the result is the same... I now have a very sad face :( Does anyone know if there is a sysex command for the L...

Re: Control pedal skips live sets in Fantom-S and Fantom-X · 17 Jan 2014

OK so I tried factory resetting, and it still does the same thing...although after skipping to 1-12, it now goes all the way up to 16 and not just 15 like before. Any ideas? Could it be the pedal? As far as I know a sust...

Topics started