Fantom-S and Fantom-X

RPS TOGGLE SWITCH POSSIBLE?

RPS TOGGLE SWITCH POSSIBLE?

23 Aug 2011, 11:46
I have a performance in wich I use 3 sounds that are layered (parts 1,2 and 3), but i don't use them all at the same time. I use 1 of them during the chorus of a song and the other 2 layered together during the verse. I read the tutorial about muting/unmuting parts using patterns so i made 2 patterns that do the following:

Pattern 1: mutes parts 1 and 2, unmutes part 3
Pattern 2: unmutes parts 1 and 2, mutes part 3

They are assigned to 2 keys that i don't use during the song, so i don't have to go to the pads.

My question is, can i do that with one pattern? So i can essentially toggle between the two states? Or maybe trigger a different pattern on the same key according to velocity?

Re: RPS TOGGLE SWITCH POSSIBLE?

23 Aug 2011, 13:31
I dont think you can assign RPS to respond to velocity and you cant create a single pattern that toggles the parts as you suggested but you can create a toggle using the D-Beam. You can have D-Beam trigger a pattern assigned to the pads though. You do this by setting D-Beam to trigger a pattern, then have that pattern have as a final step that it change the D-Beam pad assignment.

So, let's have the D-Beam trigger pattern 1 assigned to Pad 1. That pattern then does what you want it to do AND changes the D-Beam pad assignment to pad 2. Then you hit the D-Beam again and this time it triggers pad 2 which runs the pattern you want AND changes the D-Beam pad assignment to pad 1.

Now you have a toggle through D-Beam. You can also cycle through more than just 2 patterns by just setting the D-Beam assignment up properly within the patterns.

Re: RPS TOGGLE SWITCH POSSIBLE?

23 Aug 2011, 14:53
Interesting! So, what sysex message must I use to do that? Or should I record myself doing the assignment and copy those messages to the pattern?

Re: RPS TOGGLE SWITCH POSSIBLE?

23 Aug 2011, 15:00
You could record it yourself and then copy the message to the patterns. I think instead I would just record it at the end of your pattern using the record mix function but make sure you only add that assignment and pt it at the end of the pattern.

Re: RPS TOGGLE SWITCH POSSIBLE?

23 Aug 2011, 16:00
Thanks a lot, it works!

EDIT: From what i can tell, the reason why you can't do the same thing with a key, is that while recording, you cant hit shift+ RPS and go to the part assignment menu (which makes sense come to think of it because i'm trying to assign a pattern while recording patterns...)

I guess the only way would be some kind of software that could record the sysex messages from the Fantom in real time. Do you know if something like that exists?
Last edited by fixxxer113 on 23 Aug 2011, 16:16, edited 1 time in total.

Re: RPS TOGGLE SWITCH POSSIBLE?

23 Aug 2011, 16:06
Great, fixxxer113. Glad it worked. I read about that trick on Lazeeboy's post a long time ago and used it to toggle my Leslie on and off among other things.

Re: RPS TOGGLE SWITCH POSSIBLE?

25 Aug 2011, 01:55
I tried a program named MIDI-OX to capture MIDI and sysex messages on the Fantom. I noticed that while changing the pad assignment for D-Beam transmits sysex, doing the same with pattern assignment for a key does not (actually no type of message or command shows up). Does that mean that, not everything done on the Fantom is through sysex or MIDI? Doesn't that assignment get stored somehow? I mean when you actually play the note with the assigned pattern, isn't that a MIDI message that describes that?

I'm going to try and see if using the INC-DEC buttons instead of the wheel gives anything.

← Back to Fantom-S and Fantom-X