Fantom-S and Fantom-X

Xa

Hi all
I have a Xa and would like to get sounds off my Yamaha DGX 500 to my Xa, making my Xa the master and Yamaha DGX 500 the slave, Please don't get to techno on me, I put midi leads from the output/midi of the Yamaha to the input midi of the Xa that's about all I know, I cant work out how to get the Xa as the master, I'm ok with the Yamaha side being the slave, any one help, I would be grateful................Kenn
Did you connect the MIDI out on the Fantom to the MIDI in on the Yamaha?

If so, plug a pair of headphones into the Yamaha and verify that sound is coming out when you play on the Fantom. On the Fantom make sure you are in Performance Mode and on channel/part 1. This will send notes out to channel 1 on the Yamaha.

You are going to run into problems in the Fantom when trying to sequence externally. Let me know how far you get before we deal with sequencing.
Korg Oasys
Roland MV-8800
midiguru
Thanks for the help
Yes I am all ready with the leads all plugged in ( midi out on yamaha, midi in on the Xa, I have the Xa plugged into the Roland D10 Gigital stereo micro monitor to hear sounds from the Xa and both keyboards switched on, on the Yamaha I have brought up the screen that says ECL tempo, (E for external) not sure what the rest means but I read thats what to do when you connect to another keyboard, Whats next ?.......Kenn
Kenn, I think you plugged them in backwards.

Fantom = Master = MIDI "master" signal coming OUT to control others

Yamaha = slave = needs MIDI messages coming IN to control it

Fantom ====> Yamaha
Psionic11
Thanks for that I'll go and try and let you know latter this evening.....Kenn

← Back to Fantom-S and Fantom-X