MIDIguru

http://tinpan.fortunecity.com/aphex/113/

Resample the drums you want to compress and assign them back to the pads. The MV only has 1 insert effect and the intention of the design is to resample a lot. Korg Oasys Roland MV-8800

In the system preferences there is a MIDI setup page and there should be a local off setting there.

I thought about your problem for a bit and here's what I think: When you record into the Fantom's sequencer the notes go straight to the sequencer track. There doesn't seem to be a way to route MIDI out of the Fantom, by...

This may help: Since you are typically entering 16th notes in step mode, try entering a bunch of 16th notes at the point you want them. Then go into microscope mode and tweak them there. In microscope you can shift notes...

I just sold my Motif ES 6, but I'll try to help: There is a setting where you turn the ARP output on and specify the ARP output channel (Utility mode page 90 of the ES Rack user manual). When I tried this with my setup I...

Use RPS for this. If you need the bass part to play back in multiple keys or note patterns, record several patterns and assign them to each key. You are free to assign any of the 100 patterns to any of the keys. The real...

You have to play around with the mastering compressor. I usually turn up the treble band to get the sound more crisp. The mastering compressor can make the Fantom sound REAL bad if you use certain settings. That's one pl...

Hi Greg, Obviously you feel very strongly about Korg. " Hi midi, do you own the Neko ? If not, how much time have you spent with it ?" I own a PC amd have used many of the programs/VST's that come with it. I have read ab...

Hi Eric, I listened to the demos. Again I will state that the following is my OPINION just so we are clear that I am not stating any facts. The playing and musicianship are fantastic, but it still sounds like a Triton. T...