SH-01

Joystick Pitch Bend Flaw in the GAIA

Joystick Pitch Bend Flaw in the GAIA

28 Aug 2020, 05:15
This synthesizer has been manufactured for about ten years, yet as I searched the web, I have not been able to find any information on what appears to be a flaw in the pitch bend control on the GAIA, yet I have seen it on two units. When I first bought my GAIA, I saw it had a slightly defective envelope slider control, so I was going to exchange it, anyway, but I also saw this flaw with the pitch bender. When I got the new unit, it did the same thing with the pitch bender, which makes me think that it is a design flaw, and not a defect on specific units.

This is the flaw: When I first turn on the GAIA, if I do a slow downward bend with the pitch bend joystick, it acts quite weird. It seems like the entire range of its bend it done in about the first 30 or 40% of the travel of the joystick, and when it is set for a long-range bend (such as an octave) and I move the bender slowly, I can hear the bend as a series of steps, almost like a glissando, instead of a smooth and continuous pitch bend. It only acts this way for the first downward bend that I do when I first turn on the synth. After that, all subsequent bends act normal until the unit is turned off and on again. Also, from what I can tell, I can "clear" this condition by just moving the joystick all the way to the left one time right after turning on the unit, even if I am not playing a note at the time.

Has anyone else noticed this? Granted, for the way the pitch bender is used much of the time -- just quick bends of a semi-tone or a whole tone -- this flaw would likely be barely noticeable. But I find it hard to believe that no one else has noticed this in ten years. Has anyone else seen this?

Re: Joystick Pitch Bend Flaw in the GAIA

1 Sep 2020, 09:10
Thank you! I posted this question in this forum and on the forum for another website, and you are the FIRST person other than myself to respond to this question!

I think the portamento may do something similar, but I'm not sure. At one point, on the first GAIA I had before exchanging it, I was experimenting with ways to do a slow downward bend, and I tried a very slow portamento setting. When I tried that, I heard distinct stepping in the pitch as it went down, instead of a continuous slide in the pitch. Yet, when I've experimented with slow portamento settings since then on my new unit, I don't hear the stepping sound -- I just get the more continuous slide, which is what you'd want. So, I'm not sure if my first GAIA really was defective in that regard, or if there is some condition that causes the stepped portamento, just like a specific condition causes the stepped joystick pitch bend.

Re: Joystick Pitch Bend Flaw in the GAIA

2 Sep 2020, 19:54
I sort of wonder why nobody else answered. I would guess that most people looking at this thread have an SH-01, but perhaps there are people who are just thinking of getting one and looking for information.

← Back to SH-01