I know, right??? After some research, turns out the Kronos X uses SysEx to transmit drawbar information, too.... but the CX-3 clonewheel organ which Korg manufactured for a time, whose engine has been faithfully ported to the Kronos, used simple MIDI CC's for its drawbars.... 16-24 for the upper drawbars, 70-78 for the lower drawbars. Why they didn't maintain that system when putting the CX-3 engine in the Kronos is beyond me.
Reading through other forums, there is definitely a need to standardize and simplify tonewheel organ controls, not just the drawbars but everything else too, leakage, speed, percussion etc.
For those who want a solution, there are a few. M-Audio and Novation keyboards can transmit SysEx messages, and thus can be programmed to work with both Roland and Korg's organ engines. There might be other keyboard controllers or programmable MIDI controllers that can send SysEx messages, but I didn't look too hard. I like Novation's products and might go that route down the road.
As well, there are a couple other dedicated hardware solutions.
MIDI Solutions makes something called the MIDI Event Processor. This is a small MIDI box, powered by the MIDI cable itself so no external power supply is needed (caveat: some boards don't supply the correct voltage through their MIDI Out ports so you MIGHT need a power supply depending on what you use), which can be programmed essentially as a dedicated hardware filter and transformer. You can program it to convert MIDI CC's into SysEx messages, and I read one forum post about a fellow who did exactly this to allow a second keyboard to change the drawbars on the Kronos.
Ever heard of a little program called TransMIDIfier? The MIDI Event Processor is basically the hardware version of that program (btw, check out TransMIDIfier if you get a chance, it is FREE and an amazing piece of software that has allowed me to program custom keyswitches which unite all my softsynths and sample libraries under one universal control scheme).
The MIDI Event Processor is about a $170 dollar solution, and the second one costs twice as much, over 300 bucks or thereabouts. It's called the DB-1, and it is made by a company called Ocean Beach. It is a dedicated drawbar control box which can also be powered directly by the MIDI connection, and what is particularly cool about the DB-1 is that it interacts with configurator software on your computer and is ALREADY programmed to work with all of the major organ engines out there.... Nord, Roland, Korg, and even Hammond's own digital tonewheel system. Btw, you don't need your computer to run the DB-1, you just use your computer to select which control scheme the DB-1 is using, internally. It then functions as a standalone box.
So if you buy a DB-1, the work is done for you. Hook it up to your computer, toggle which control scheme you need, and then run your keyboard through the DB-1 and you got yourself an instant lower or upper manual with its own drawbars that will work with a Nord, a Jupiter or Integra-7 or an FA, or the Kronos. If you buy a MIDI Event Processor, you have to program it yourself which means digging through forum posts looking for accurate information on what kind of SysEx messages your chosen clonewheel engine generates (because they each do it their own way).
Personally, I'm not sure what I'm going to do yet. Probably the MIDI Event Processor. It's cheaper, and I don't have to essentially admit my MPK61's faders are just for show. As long as I can figure out the SysEx messages, and there are a few forums with helpful and knowledgeable folks whose brains I might have to pick for this, I'd rather have a small black box that can sit on a blank patch of keyboard chassis somewhere in my rig (maybe even Velcro'ed on but I hate attaching adhesives to my beautiful instruments!!), and use the MPK61's faders for drawbar control, converting the MIDI CC's of the faders into SysEx messages the FA and Kronos can understand.
But depending on how many boards and modules I add to my rig going forward (right now my existing hardware supports the possibility for dozens of MIDI units, if I had all that stuff), I might grab a DB-1 for a board that doesn't have its own faders, or not enough of them, for drawbar control.
-Tom