Fantom-S and Fantom-X

Piano Patch Editting Techniques

Piano Patch Editting Techniques

13 Sep 2009, 20:57
I just noticed a problem recently, prompted by another company's modle. ;)

As we know, on real pianos, the notes at/above note G5 (2 octoves above middle c) have no damper effect. I have checked the piano patchs on Fantom X. Yeah! It does behave like the real piano. But next how can it be? I remember Fantom X does not have such control setting. I re-read the manual and dig into the piano patch deeply, still can't figure out how Fantom x does it.

Anyone can help? Thanks.

Re: Piano Patch Editting Techniques

13 Sep 2009, 22:13
Hi Compusic!

As is the case with the UltimatGrand patch in the 'X', it uses 4 stereo samples triggered at 4 different velocity stages for each key. (over 700 samples -- 704 to be exact!) This effect is built into the wave itself.

Cheers!
PiaKnowGuy
Please listen to Don't You Think It's Tacky?

Image
PiaKnow
PiaKnowGuy
Please feel free to listen to Pirates
[img]http://www.piaknow.com/1goldpiaknowlogonew-thumbnail-thumbnail.jpg[/img]
PiaKnow

Re: Piano Patch Editting Techniques

13 Sep 2009, 23:55
Thanks for reply. I'm afraid it's not because the effect is built into the wave.

For example, I push down a note above G5 and release it immediately, even I do not push down the damper, the notes above G5 is till ringing after I release the key. but the notes below G5 will stop ringing after release the keys. That's because the TVF and TVA envelops take effect. How can a note continue to ring after the TVF/TVA envelops shut it down? Maybe You can say that TVF/TVA envelops do not affect those notes above G5. but where is the setting? Can't find similar settings anywhere.

Re: Piano Patch Editting Techniques

14 Sep 2009, 00:40
You can have 4 tones per patch. For each tone, you get to set what key range it plays over, and also whether it responds to sustain pedal (ie, controller 64).

In the piano patch, there is one tone that is set to play only above G5. (The other 3 tones are set to play only below G5). This one tone is also set not to respond to sustain pedal. The VCA is set to a long sustain.

And there you have it.

Re: Piano Patch Editting Techniques

14 Sep 2009, 01:35
Hi Jg!

Under normal circumstances, you would be correct. (aside from VCA instead of TVA - time variant ampltude) However, the UltimatGrand patch on the 'X' is handled differently than the other patches and contains a larger number of samples! To hear an example of what I was trying to explain earlier,

1) Choose UltimatGrand in PATCH mode

2) Press PATCH EDIT twice

3) Press [F8] Tone Sw/Select

4) Turn off tones 1,3 and 4 (just as an example). Now play the transition range to hear a sample set change. This is not done using a TVA envelope. If you dig alittle deeper, you may also notice that key ranges have nothing to do with the transition point. It is part of the extensive sample set used for this particular piano.

I hope that I have explained this adequately enough.

Cheers!
PiaKnowGuy
Please listen to Don't You Think It's Tacky?

Image
PiaKnow
PiaKnowGuy
Please feel free to listen to Pirates
[img]http://www.piaknow.com/1goldpiaknowlogonew-thumbnail-thumbnail.jpg[/img]
PiaKnow

Re: Piano Patch Editting Techniques

14 Sep 2009, 02:04
yes, this example has nothing to do with keyboard split or responce to damper pedal. As for these points, piaknowguy is right.

Then it must be due to the multisamples?

But the TVF/TVA will affect the whole tone, how can a part of the tone, or can I say certain samples within a multisample?, escape from the control of TVF/TVA?

I have tried to make a multisample, can't find any related setting.

Re: Piano Patch Editting Techniques

14 Sep 2009, 11:14
I don't remember which piano patch I edited on my XR, but that sustain effect was definitely done as I described above in that patch.

Re: Piano Patch Editting Techniques

15 Sep 2009, 05:28
Yes, quite a few piano patches have splitted zones, but the keeping ringing effect is not due to whether the zones respond to damper pedal, such zones usually have very long release time (time4 parameter) for TVF/TVA.

But as for the UltimatGrand patch, it's different. there's no splitted zone. It's very strange that a segment of a zone can escape from the control of TVF/TVA.


Waite, as I'm fiddling with Fantom X while writing, I just find the key point for the UltimatGrand patch. After I release the key, the envelop's release time (time4) parameter will take control of the notes below G5 (that's a nomal behavior, right?), but has no control of notes at/above G5 ( abnormal! ). Then guess what? The envelop's time2 and time3 parameters have effect on notes at/above G5 after I release those key. This patch does have very long time for time2 and time3 parameters, after I shorten those times, the notes at/above G5 stop ringing after release the keys.

How can it be? Where can I make such setting?

Re: Piano Patch Editting Techniques

9 Oct 2009, 21:47
BUMP UP.

I have tried many ways to make a patch from scratch to behave like the UltimatGrand patch. I noticed that there's a Tone Envelop Mode setting. To let a sample keeps ringing after I release the key, I have to set the mode to NO SUS, and increasing the Time 2 or Time 3 value is also required. But for the UltimatGrand patch, the mode is set to SUS, while in this mode, I can't let a sample keep ringing after I release the key, no matter what I set for other parameters. The value of Time 4 is not important here, since it should be a low value for nomal key-off behavior of other samples whithin the same multi-sample.

and To piaknowguy:

You said "This effect is built into the wave itself. "

How is this effect built? Why can't I make the same effect? or are there any hidden parameters or functions that our users have no access to?


Edit: Just have a guess. Whether those samples have more loop or kind of control points? and we have no access to those points? can't set those points either?

Re: Piano Patch Editting Techniques

10 Oct 2009, 09:03
Some piano sample libraries have post-sampling processes to correct problems. As an example, i think that piaknowguy is saying is that the samples may have been modified with extra reverb (for higher octaves) and filtering (for masking the pp dynamics problem of high noise to ratio diferencial).
Piano samples are not a product finished after recording the actual samples, most manufacturers spend months or even years tweaking and altering the initial soundset.

Re: Piano Patch Editting Techniques

10 Oct 2009, 09:26
Thanks for reply.

But I'm afraid it's not the case for this piano patch. Do you mean reverb is processed into the sample to let the note have a long tail? If so, then you haven't understood the key point. ;)

Re: Piano Patch Editting Techniques

10 Oct 2009, 11:18
Hi Compusic!

In the case of the Fantom X series, I believe the UltimatGrand patch to be the exception to the norm when patch editing. It contains a 'special' set of samples recorded specifically for this 'special' patch. This is the only patch that uses 704 individual samples. This 'effect' you hear in the upper range of the piano patch is contained with-in the sample itself.

Cheers!
PiaKnowGuy
Please listen to 'Pirates' done entirely on the Fantom X8

Image
PiaKnow
PiaKnowGuy
Please feel free to listen to Pirates
[img]http://www.piaknow.com/1goldpiaknowlogonew-thumbnail-thumbnail.jpg[/img]
PiaKnow

Re: Piano Patch Editting Techniques

12 Oct 2009, 21:28
Thanks for reply.

I'm afraid there's some secrects Roland does not want users to know. ;)

Or if the effect is built into the samples, how can I, a user/tweaker/sound designer, make such kind of samples?

Re: Piano Patch Editting Techniques

13 Oct 2009, 21:25
Some of the effects are well suited in the samples. If you try to create a piano sound from scratch you'll see that there's quite a bit of sound editing to do. So the reverb added to the samples and the filtering done to take away unwanted harmonics are welcome. The problem will always be that tweaking a sound is at last... tweaking a sound. It can make your sound more suited for your style of playing and needs , but let's face it even 30Gb pianos fall short to the real thing.

Re: Piano Patch Editting Techniques

13 Oct 2009, 22:53
well, my key point is not making a piano patch, what I want is to have the ability to make settings like that piano patch on Fantom X.

To make it clear, first make a multi-sample, no need to be a complecated one, next is to control the different key-off behaviors of the samples. Make certain samples within the multi-sample to escape from the control of TVA parameter Time 4, or under control of parameters Time 2 and Time 3, and at the same time other samples within the multi-sample are under control of TVA parameter Time 4. Anyone can make such settings? I'm afraid none, except Roland. ;)

Or it's said that the behavior is built into the samples. then can anyone, except Roland, make such samples? well, I can still use TVA parameters Time 2 and Time 3 to control those samples key-off release time. If the effect is built into samples, that means those samples are not under control of TVA, do I understand correctly? then why can I control their key-off release time, in an abnormal way? Unreasonable!

BTW, I have tried all the possible settings, such as sample playback mode, Tone Envelop Mode, etc.

← Back to Fantom-S and Fantom-X