Controlling MFX with External Controller
10 Mar 2009, 10:57I use an original Roland AX-1 to control the fantom for some songs at live gigs. It tranmists on channel 2 and the fantom receives on channel 2 and it works fantastically well. I can select patches, control the volume, I'm very happy with it, except for one problem.
It has one knob which can be assigned to any midi controller, and by default it is set to [CC07:Volume].
This works for most patches, except for one that is going thru an MFX set to Guitar Amp Sim. (For example like in PRST06: Burning Lead)
Most of you probably already know that with the Guitar Amp Sim, for a smooth, acceptable volume curve, the volume needs to be controlled after the MFX, not before. Using controller [CC07:Volume] changes the volume BEFORE the MFX, and it is unacceptable - the difference from loud to soft is not smooth at all.
Also I cannot reach the Master Volume on the fantom when playing the AX-1.
Ideally i need to be able to control the level of the MFX.
So what I did was change the AX-1's knob to send [CC02:Breath] messages.
Accordingly, in the effects section in MFX Ctrl, SOURCE was set to CC02: Breath, and DESTINATION set to Level.
Of course MFX control channel is set to 2.
And does it work? ......
Of course not.
I've tried all the possible Sens settings.
Sens=0 No effect
Sens=+63 Causes something to happen, although it definately does not sound like level is changing. It sounds like its opening and closing a filter.
Sens=-63 Causes it to work as desired but in reverse: meaning volume up = level down, which is also unacceptable because i need to switch between sounds and this can cause some killer volume placements.
I've also tried other midi messages such as CC16:General-1 but this gives the same result.
Guys i know this is a rather tough one. It's got me completely stumped.
That red AX-1 is best suited to the guitar amp simmed sounds, but having no volume control over these makes it rather impractical which is a tragedy really.
To try and figure out a solution to this, someone would only need an external controller that has an assignable knob.
Any help would be hugely appreciated and if it works ill be eternally grateful.
Johnnykeys1978
PS I learned EVERYTHING about my fantom here. EVERTHING. I reckon even my job in the local music shop selling rolands was partly because of you guys.
This is my first post. Its the first time i have not been able to find the answer in previous answers.
It has one knob which can be assigned to any midi controller, and by default it is set to [CC07:Volume].
This works for most patches, except for one that is going thru an MFX set to Guitar Amp Sim. (For example like in PRST06: Burning Lead)
Most of you probably already know that with the Guitar Amp Sim, for a smooth, acceptable volume curve, the volume needs to be controlled after the MFX, not before. Using controller [CC07:Volume] changes the volume BEFORE the MFX, and it is unacceptable - the difference from loud to soft is not smooth at all.
Also I cannot reach the Master Volume on the fantom when playing the AX-1.
Ideally i need to be able to control the level of the MFX.
So what I did was change the AX-1's knob to send [CC02:Breath] messages.
Accordingly, in the effects section in MFX Ctrl, SOURCE was set to CC02: Breath, and DESTINATION set to Level.
Of course MFX control channel is set to 2.
And does it work? ......
Of course not.
I've tried all the possible Sens settings.
Sens=0 No effect
Sens=+63 Causes something to happen, although it definately does not sound like level is changing. It sounds like its opening and closing a filter.
Sens=-63 Causes it to work as desired but in reverse: meaning volume up = level down, which is also unacceptable because i need to switch between sounds and this can cause some killer volume placements.
I've also tried other midi messages such as CC16:General-1 but this gives the same result.
Guys i know this is a rather tough one. It's got me completely stumped.
That red AX-1 is best suited to the guitar amp simmed sounds, but having no volume control over these makes it rather impractical which is a tragedy really.
To try and figure out a solution to this, someone would only need an external controller that has an assignable knob.
Any help would be hugely appreciated and if it works ill be eternally grateful.
Johnnykeys1978
PS I learned EVERYTHING about my fantom here. EVERTHING. I reckon even my job in the local music shop selling rolands was partly because of you guys.
This is my first post. Its the first time i have not been able to find the answer in previous answers.