MrPillow

Headphones = stereo Mono output = mono Headphones = isolated, channel isolated, frequency isolated PA = not Headphones color your sound PA's color your sound. Your Fantom could sound drastically different through the hea...

The solo synth is the same as it was on the X, 2 osc VA synth that cna only be controlled by the D-Beam. Offers only Saw or Square waves if I recall correctly.

Either via Card or USB file storage, drag and drop the MIDI file into your Fantoms SEQ-> SNG -> folder Press the save/load button, load song, choose the right file, and there it is.

Although the Jump for KY patch is alright, I find it much more effective to tweak and combine the waveforms from that patch, and the "slowsupersaw" patch, cant remember the exact name.

When I had this problem it was the power supply of the PC causing it. If it's a laptop, unplug the power. If not, try a different comp.

I dont think there is any way to switch from a patch to a performance or vice versa without the sound cutting out. Maybe put the patches you need into performances, and put those as well as the pre-existing performances...

I have a chance to get a new system for really really cheap but it only has a 1.6ghz Intel Dual Core processor. Will this be fast enough to run say, Sonar 7, Akoustik Piano, etc? If not I can always install a better proc...

I've also found the gain/inputs on the Fantom entirely unsuitable for microphones. Not only do you have to set it to the highest gain setting, you also can need another +10dB at least from a compressor/limiter etc. By th...

If you buy a ribbon controller there is. http://forums.rolandclan.info/index.php?action=show_thread&thread=20807&fid=16&page=1 $400 well spent.

Because something new and improved is needed to compete with the Motif XS, M3, Kurzweil PC3, and the onslaught of people switching to computer based setups.