xzased

Come on!! What does it take for the mods to make a sticky out of this? This problem is common enough to do so. Well, anyways, here is the reason and solution to this problem (that I also had): From what I saw, the solder...

I you open up your FX (I dont recommend it though, unless your warranty has expired and you know about electronics), and have a look at the knobs' circuit board, you can see that the potentiometers are separated by at le...

Nop, you dont have to replace the circuit board if its the knob problem. I found out the main cause of it and has nothing to do with the circuit board at all.

I had that problem and turned out to be an issue with the knobs. Try to change some values of a sample with the knobs in sample edit (end, loop, etc...) and see if the values start changing by themselves. If this is not...

Plus, mp3's sound like crap, too much compression there. Also, you can always convert mp3 to wav.

So, anyone updated yet? The file is available at rolandus.com already

I just fixed my FX7... as you know, some have had issues regarding the control knobs (changing values by themselves) and fixing this baby was a mistery, until now. Its very easy fix, I believe anyone can do it in less th...

Yo, does this mean that Fx users can rejoice on 1gb ram???

Well, reading the specs it is a great machine. However, I would not sell my fantom to buy one. Reasons: The same poly (128), they just added half damper to a large 3 strike piano, I already have that in the fantom. I hon...

Also, are you using balanced cables? Fantom S has balanced outputs for the A section. I notice a greater punch and more quality in using balanced cables in my fantom x (The manual states that you should expect 50% volume...