Regarding the knobs...

22 Oct 2006, 16:41

Hi there, I found that when I turn on the fantom (patch mode) the sound is affected immediatly by the position of the knobs (cutoff, etc..) and Itried to disable those knobs going to ctrl setting followed by ctrl part and setting the knobs to affect the pads and write it to the system, but when I turn on the fantom again it still affecting the keyboard part, nothing was saved. Can anyone help me on this one?

Re: Regarding the knobs...

24 Oct 2006, 09:20

anyone??

Re: Regarding the knobs...

24 Oct 2006, 11:21

I think this is disabled by the 'Patch Remain' flag set in the system menu. Patch Remain = ON also makes a patch keep sounding (if it has sustain) after changing the active patch, if I recall correctly, though you'll hear a hiccup if the new patch has a different MFX algorithm.

Error 144 - Reboot y/n?

Error 144 - Reboot? Y/N

Re: Regarding the knobs...

24 Oct 2006, 11:29

Right after picking a patch in pathmode, does an asterix(*) appear next to the patchname? Without you doing anything.

If so, this is a sure sign of faulty knobs. Probably a loose soldering point.

Consider having your Fantom repaired, especially when still under warranty.

Regards,
Laurenz Nitert

____________________________________________________
Now, if you'll excuse me; i've got some more cuddling to do

Regards,
Laurenz Nitert

_____________________________________________________________________________________________________
Goodiebag: { Live 2.0(svq, doc) | Vilter Pads(svq) | RPS Status(zip) | XV5080(zip) | Fantom X + V-synth | mp3 }
[img]http://www.nitertautomatisering.nl/fantomized/lazeeboy.jpg[/img]

Re: Regarding the knobs...

24 Oct 2006, 12:00

What Im concerned is that the fantom will not remember my settings for the control part. When I save it to control the pads it still shows that its controlling the kbd when I turn it on again.

Re: Regarding the knobs...

12 Dec 2006, 16:35

I am concerning same:

When I browse patches and I move with "realtime control" knobs such a Cutoff, Attack etc. it changes the current sound. But as far as I switch to next patch, the changed Cutoff, Attack etc. remains, the next patch is affected by changed knobs form previous patch.

How to avoid that? It pisses me off all the time, it prevents mes to browse patches effectively. Any advice how to fix it ? What do I do wrong ?

Re: Regarding the knobs...

12 Dec 2006, 17:18

Why are you playing in patch mode anyway?

I find it a waste of time and not representative of what the Fantom X can do ...

Still, I've noticed this as well ... (I'm not sure there's a cure for patch mode; I wouldn't know)

But in performance mode, I simply switch to another performance and everything goes back to normal ...

. . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Roland Fantom X7, Alesis Fusion 6HD, Novation X/A-Station 25, Alesis Micron

Some tunes and whatnot ...

http://www.soundclick.com/bands/page_music.cfm?bandID=405125

some tunes and whatnot ...
http://www.soundclick.com/bands/pagemusic.cfm?bandID=405125

Re: Regarding the knobs...

13 Dec 2006, 10:49

Yeah, I meant Performance mode and Patch list, I wrote bad. But still when changing patches, new patch have changes inherited by previous patch.