xonox

You can choose from the main sequencer screen to output midi to internal, external, both or off. Internal goes only to the fantom engine, external only to midi output. Hope this helps

halo7 : if i remember right, i used the knobs on the bcr2000 to control the filter cutoff and resonance of the fantom X. Lately i have been using the knobs to control any parameter that shows up in the modulation matrix...

Lots of things can be connected to your fantom X. I use a behringer bcr2000 to control several things on the fantom. You might encounter some limitation sometimes but the fantom is very flexible in most aspects. I usuall...

I had the same problem with older equipment like a yamaha tx81z and ensoniq ESQ1. My fantom just wouldn't record their sysex dumps. Turns out they just churn out one big sysex packet... I exchanged a few emails with Rola...

you can mute parts using the mixer in performance mode. You can't mute midi channels. Muting a part just seems to lower its volume to 0. The pads only mute internal parts. No luck if you want to mute midi data going to e...

I am surprised to see nothing coming from smaller manufacturers. A lot of little manufacturers are currently producing sequencers. There's so many of those, genoqs, sequentix, signal arts, future retro, doepfer, manikin...

Well, from what i could see there is only a few patchbay currently made... The most powerful one i know is this one : http://www.motu.com/products/midi/mtpav_usb/ I checked out a midi time piece 2, and it seemed very pow...

I am wondering how everyone is connecting all their gear together. I use an old roland a-880 midi patchbay to connect my stuff together. What do you use ? Let me know if you use a computer or not with your setup (i do no...

Can you record with chained mfx processors ? Like when you chain mfx1->mfx2 ? So i could record external gear using a pitch shifter effect piped into a delay...

Are you recording to your computer or directly in the fantom sequencer ? I use the regular sequencer to backup my other gear via sysex. It works fine except when sysex packets are too big, then the fantom ignores those....