V-Synth

Newbie Question

Newbie Question

12 Apr 2006, 08:26
Hi Everyone,
I just got my V-Synth XT last night :) It's an amazing synth. Obviously, I have few questions which I hope are probably very basic for many of you vTribals here.

1. Is there a sound editor for V-synth XT for Mac OS X platform?
2. When I'm routing audio from my MC-505 into the analog audio input of XT, to process in realtime, I don't hear MC-505 audio coming out of the XT. Do, I have to adjust some settings? or, do I have to be in a certain "Mode"?

Thanks in advance.

Emran

FYI, I figured it out.

12 Apr 2006, 08:32
2. When I'm routing audio from my MC-505 into the analog audio input of XT, to process in realtime, I don't hear MC-505 audio coming out of the XT. Do, I have to adjust some settings? or, do I have to be in a certain "Mode"?

I had to go in System mode and click on INPUT Jack Sxitch & select a USB Audio Input Sourse as "ANALOG" & turn the Monitor SW "on".

Thanks,
Emran

Still an issue

12 Apr 2006, 08:40
I'm able to route the MC-505 audio via XT but I can't seem to do any processing using XT's filters effects, time trip pad etc.?
Nice to have this thread all to myself but can someone please help!

It will be greatly appreciated.
Thanks,

Re: Newbie Question

14 Apr 2006, 00:55
as you probably already know this forum just merged with other roland frums.....I say this because there use to be a FAQ and help section with various download links dedicated just for v-tribe.... there still is one but its not like the old one and is missing some info....who knows it might be back soon?
sorry can't help, but i don't know much about mac's and i've only had my v-xt for a week. :)

Re: Newbie Question

14 Apr 2006, 02:11
"as you probably already know this forum just merged with other roland frums.....I say this because there use to be a FAQ and help section with various download links dedicated just for v-tribe"

Sorry guys, the stuff is being moved here, slowly but surely ;-) The patch downloads will be here this week, next week we'll move the documents and the FAQ as well.

So far, get all at the V-Tribe:

http://v-tribe.info/downloads/patches/
http://v-tribe.info/documents/
Thanks Artemio/Spugga,

I briefly read thru the tips & trick and there seem to be something regarding using the V-synth as a filterbank (No. 11) but still there are no instructions as how to do it? Do I need to use some special patch in order to see this in action? What else can be done to external audio signal with V-Synth etc. ? Sorry, this may seem a very basic questions but I just got my XT, 2 days ago.

Thanks,
Emran

Re: Newbie Question

14 Apr 2006, 08:48
You should be able to find some preset filterbank patches at the end of the presets bank, around numbers 500-510. The whole trick is create a patch with 16 zones, for each zone set up OSC type to external input, and then add different COSM blocks to each zone which will work like a realtime filter. Then you feel some audio into the line input, press a key, and it gets filtered with the COSM blocks assigned to the zone this key you pressed belongs to. If you switch the zones in rhythm with the audio, it makes some cool effects.

It's partially working

14 Apr 2006, 09:56
Artemio,

I'm trying this as I type this reply. I was able to modify a patch 501 and routed some external audio (drum loop) and was able to play with the COSM filter (way too cool) but I can trigger the external sound from ZONE 5 only. I can switch the COSM type within this zone and hear the difference but I cannot hear external audio loop coming out of any other zone (all zones are using OSC1 type = Ext IN and all of the OSC1 are turned on). Am I missing something here? Thanks for all your help soo far!

← Back to V-Synth