V-Synth

Ceating drum kits by using drum wav files

Ceating drum kits by using drum wav files

25 Jan 2006, 15:39
Can anybody tell me (step by step) how to create a drum kit by using wav files and then save this drum kit as a preset in order can I use it later on with my master sequencer (I have a yamaha RM1X) ?

Cheers

Re: Ceating drum kits by using drum wav files

26 Jan 2006, 06:49
There are basically two ways to create a rhythm kit:

1. As in the Tips and Tricks section that JD pointed to, you can pick up a drum loop, encode it with backing, and then you can use it in a patch - with playback mode set to EVENT you'll have all individual chops assigned to different keys.

2. You can also split your patch into 16 zones drum-kit style (MENU -> Zone -> Drum Kit) and then assign a drum/percussion sample to each zone. Moreover you can tweak each zone with VariPhrase as well as add COSM blocks. Check out the "KIT" patches at the end of the V 2.0 presets bank, and also the "V-Lectric KIT" in the TweakBook patch set (patch page on the V-Tribe main site).

threadjack - mapping to a roland electric drum

28 Jan 2006, 03:38
My drummer has a Roland drum module (I cannot remember the name/model, but its the controller for a whole drum set of Roland triggers). We have done some work trying to get it to play with the V-synth drum sets and results were generally poor. It maps to channel 10, general midi style. Not to suck up your time, but have you had any experience in getting V drums to trigger from output of the Roland electronic drumsets, and if so do you have any tips on best way to map it? I have recorded midi output from his sessions and can see what note events are triggered, just don't have any idea how they would map to V drum kits. The only kit that seemed to work was the one you wrote :)

Thank you!

Keyboard? What keyboard?

Re: Ceating drum kits by using drum wav files

28 Jan 2006, 06:44
First is that you should set the V-Drums to MIDI channel 1, then the V-Synth's selected patch can be played from the triggers. If this is not possible and you have to work with channel 10, go to V-Synth's MENU -> Info and set channel 10 (part 10) to the drum kit you like and it should work.

← Back to V-Synth