Fantom-S and Fantom-X

URGENT !!! Fantom XA : PADS

URGENT !!! Fantom XA : PADS

1 Feb 2006, 20:08
Hello,
I recorded some loops to my fantom XA,and then assigned them to pads.My problem is that I have just (if I am not wrong) two options : to press AND hold my finger on pad to hear loop,OR to press HOLD button and then to trigger loops.Problem is that with hold option,I need to hit pad once again to shut it off,and then again to play it again.I hope everyone understand me :) I play keyboard all the time,so I don't have time to hit pads more than I have to.Can I assign pad to play loop till it ends,and then shut off (pad),or I must do that manually.

Thanks,sorry for my bad english,I hope you will understand me,
Best regards
Mirko

Re: URGENT !!! Fantom XA : PADS

2 Feb 2006, 08:08
AFAIK, if you press the hold button the sample plays until it's finished, and does not loop... so you can leave the pad flashing and it won't play the sample after the first loop.

However I've an X7, so don't take this for granted :)

Francesco

Re: URGENT !!! Fantom XA : PADS

2 Feb 2006, 13:17
You have a few options here....

1. modify the loop settings of your sample in the sample edit screen

2. Hold shift & press the pad... you shoudl have some more options in here. (this is all a little vague because I'm not by my fantom)

3. Create a pattern & use the RPS function (and you'll have to set further loop options.

to create an RPS, just go into your song/edit sequencer screen & copy the chunk you want into one of the patterns... then hold shift & press RPS to assign your pattern to a key/pad & make your loop settings.

Hope you find something useful in all that.

__________________________________________
"Real musicans don't need expensive equipment to create... a true artist will make music with anything that is around them." ~ Mom

Pearls of wisdom, no mistake, but I bought a Fantom-Xa anyways ;)
__________________________________________
"Real musicans don't need expensive equipment to create... a true artist will make music with anything that is around them." ~ Mom

Pearls of wisdom, no mistake, but I bought a Fantom-Xa anyways ;)

Re: URGENT !!! Fantom XA : PADS

2 Feb 2006, 19:16
my bad english ... :)
I assigned some orchestra hit to pad 1,orch.hit+some hammond chord on pad 2,and some effects on pa 3.I need those samples many times during one song.So,is there any chance for me to hit pad 1,have orchestra hit played,and then PAD OFF(NOT to flash,like I have with HOLD option),because I have no time to turn PAD off and then again ON to have orchestra hits played.

I hope now I explained this better.
Thanks,best regards
mirko

Re: URGENT !!! Fantom XA : PADS

4 Feb 2006, 10:10
Solution to this problem?Anyone?

Thanks,
Best regards
Mirko

Re: URGENT !!! Fantom XA : PADS

5 Mar 2006, 15:58
I just did a quick-and-dirty method to deal with this. I had a gong sample assigned to a pad that took about 6 seconds to decay, but I needed to trigger it every 4 seconds, and didn't want to chop off the decay.

...so I just assigned the same gong sound to three pads, and use the 'HOLD' pad.

once the sample is set as 'one shot', I can hit the 'HOLD' pad at the beginning of the song, and then trigger the gong on each of the three pads in order. By the time I get to the third pad, the first pads loop has finished, and I can hit it again.

--
Gregg

"It's not broken, it just lacks duct tape...."

FantomX8, Kurzweil K2500X, Hammond XK-2/KorgG4, Alesis QS8.1, YamahaW5v2
--
Gregg

"It's not broken, it just lacks duct tape...."

Roland Fantom G7, FantomX8 | Kurzweil K2500X | Hammond XK-1, XK-2 & KorgG4
Alesis Ion | Alesis QS8.1 & QSR | Yamaha EX5R | YamahaW5v2 (x2)

← Back to Fantom-S and Fantom-X