Please no arguing in this thread; it's rather distracting
Faccio84 probably misunderstood and typed in a rash reply, but he's very enthusiastic which is what drives me here (let's not discuss this any further nkee?). He also came up with an excellent idea which I will incorporate in all my organ/leslie performances.
As for re-usable templates. This could be arranged (see below), but it's so much better if you understand the notions behind all this yourself as you will be able to custom-make you own performance/svq's and it will hopefully inspire you to develop your own solutions which you will hopefully share here
At the moment I don't have my Fantom with me so I cannot do this for you right now. You can give it a go by trying yourself. Just adjust my
template.svq in the very beginning of this thread to meet your needs as follows:
- load it
- go to song mode
- pattern mode
- micro-edit pattern 1
- edit the 1st sysex event
- adjust 00 (3rd last byte) to 01
- micro-edit pattern 2
- edit 2nd sysex event
- adjust 00 (3rd last byte) to 01
- micro-edit pattern 3
- edit 3rd sysex event
- adjust 00 (3rd last byte) to 01
.....
- micro-edit pattern 16
- edit 16th sysex event
- adjust 00 (3rd last byte) to 01
In RPS setup:
- assign pattern 1 to pad 1
- assign pattern 2 to pad 2
- assign pattern 3 to pad 3
...
- assign pattern 16 to pad 16
- create your performance
- turn ON all the keyboard switches
- Save the song
- You've got your re-usable svq!!!
BTW this is a good exercise for anyone who wishes to learn how to do this. Good luck!
To switch the MFX's along with the parts you'll have to add some more sysex and you'll probably hear transition noises when switching. If however you work in a fixed order when playing the song/live performance, it is possible to smartly arrange the sysex's to minimize these noises. I'll give you a nudge in the right direction:
Pattern/Pad 1
- turn on part 1's receive switch (code is already there)
- turn off all the other receive switches (code is already there)
- mute MFX 2 (or not ;- dunno)
- set MFX 2's routing to part 2
- unmute MFX 2 (or not ;- dunno)
Pattern/Pad 2
- turn on part 2's receive switch (code is already there)
- turn off all the other receive switches (code is already there)
- mute MFX 1 (or not ;- dunno)
- set MFX 1's routing to part 3
- unmute MFX 1 (or not ;- dunno)
....
This method does NOT take into account the Reverb and Chorus. As there's only one Reverb and Chorus you cannot illiminate all transition noises (THIS CANNOT BE HELPED as it's a technical deficiency). You could choose to use the same Reverb/Chorus combo for all the parts or you could go ahead and re-route them along with the MFX as follows:
Pattern/Pad 1
- set Reverb's routing to Part 1
- set Chorus' routing to Part 1
- turn on part 1's receive switch (code is already there)
- turn off all the other receive switches (code is already there)
- mute MFX 2 (or not ;- dunno)
- set MFX 2's routing to part 2
- unmute MFX 2 (or not ;- dunno)
Pattern/Pad 2
- set Reverb's routing to Part 1
- set Chorus' routing to Part 1
- turn on part 2's receive switch (code is already there)
- turn off all the other receive switches (code is already there)
- mute MFX 1 (or not ;- dunno)
- set MFX 1's routing to part 3
- unmute MFX 1 (or not ;- dunno)
....
All you have to do now is figure out or record the sysex code for the above steps and micro edit your way to eternal bliss
Laurenz Nitert