Fantom-S and Fantom-X

HOW DO i SPLIT MIDI TRACKS

HOW DO i SPLIT MIDI TRACKS

5 Jun 2005, 17:25
Newb here again
um using some midi tracks for backing/playing live but when loaded into my x8 all the data is on the one track how do I go about seperating them? Man this site is soo good guys who ever thought up the idea for this is genius i encourage donations man your knowledge is worth every bit thanks heaps.

nick

Re: HOW DO i SPLIT MIDI TRACKS

5 Jun 2005, 18:28
nick,

You want to use the Extract function to accomplish what you want.

Got to Song Edit>Track Edit>Extract

For the SRC Track, select the track that contains the data. Select ALL Ch/Parts and Extract to ALL tracks.
Page 188 in the X manual has the info.

Hope this helps you out.

Bassman
Bassman

Re: HOW DO i SPLIT MIDI TRACKS

5 Jun 2005, 18:29
There is a section of the manual ( assuming you have it) called " EXTRACTING AND MOVING A PART OF SEQUENCE DATA". in the "edit song data" section. Basically you have to extract the data by channel. Move cannel 2 data to track 2 and so on. Just specify what data you want moved and to where. I dont have a keyboard, just the XR module so I am not sure which buttons to push.

Hope this helps

Re: HOW DO i SPLIT MIDI TRACKS

5 Jun 2005, 18:33
Shaggy,

I think you can extract all tracks at once and they will go to the corresponding midi channel>track assignment. I have done a few that way. However, there's always the exceptions, or maybe I got lucky!

Bassman
Bassman

Re: HOW DO i SPLIT MIDI TRACKS

5 Jun 2005, 18:41
You are most probably right. I only have the manual pdf of the X keyboards. And not an Actual Keyboard. There are no such functions on the XR.
Just trying to help

Now the sounds keep changing

5 Jun 2005, 18:53
Thanks heaps.
Now Ive got the tracks seperated when I change the sounds to the tracks its all good but then I push rest to go over again and the sounds change back to what they were originally. Do I have to save or something.? before I push reset?

Re: HOW DO i SPLIT MIDI TRACKS

6 Jun 2005, 09:51
nick,

This is a reply to your other post. . .

What is happening to you is not unusual for a midi file. You simply have to remove all of the Program Change messages that are on the tracks that you extracted.

To do this go to Song Edit>MicroEdit.
Press F7 to select each Track. Go through each and every Track and look for any line that says 'Program Change'.
Erase any of these that you see on any track.

When done, press 'Song Edit' again to get back to your Track screen. You can now go to the Mixer screen and select your Patches as you outlined in your other post. Once you've done this, play the song for a few bars to make sure you have what you want, then immediately save it. All of your changes are saved with the song.

Give this a try. Should work for you. If not, ask more questions.

Hope this helps.

Bassman
Bassman

Re: HOW DO i SPLIT MIDI TRACKS

6 Jun 2005, 16:18
thanks bassman IT WORKS!!!!
ITS ALIVE .......
ok another question.
On a certain track it starts with a violin four bars into it I want to change the sound to a piano instead. Do/can I fade the violin out with piano patch over top or is it a cut/paste track at certain points.
I know what I want to do but the jargon and tech side OF THINGS is elluding me. OR how do I insert a program change or something to that effect.

Re: HOW DO i SPLIT MIDI TRACKS

6 Jun 2005, 20:11
nickjrnz,

To insert a Program Change, use the same prior steps used to get to Micro Edit. This is what you would do to change voices within a Track.

Select 'Create', then select 'Program Change' when the dialog box pops up. After that occurs, you will see the Program Change line added in the event list. Cursor up or down to that line, then use the left cursor button to tab over to the Program Change number field and enter your number. If you don't know what that number is, you can find it by going to the Patch select screen and it is displayed at the bottom of each Patch.

Hope this helps.

Bassman
Bassman

← Back to Fantom-S and Fantom-X