LSB/MSB to change scenes

4 Mar 2025, 22:58

Have a Luminite FX Graviton M1 midi out to Fantom 06 midi in.
Scene channel 16 Sending 3 messages CC32 85, CC01 0 & PC 1
when I send those commands the little yello checkbox appears but scene
doesnt change. Any tips here? Tried setting the scene channel to 1 didnt do anything either

Re: LSB/MSB to change scenes

6 Mar 2025, 02:54

Normally, MIDI controllers support PC messages with bank MSB and LSB. It sounds as if this is not the case for the Graviton MIDI controller, and you have to manually add CC messages for bank MSB and LSB. This is not ideal, because it is easy to make mistakes, and because the CC messages for bank MSB and LSB behave slightly differently than other MIDI CC messages.

In your case, you are apparently using the wrong CC number for bank MSB.

Re: LSB/MSB to change scenes

6 Mar 2025, 11:56

Hey XP.... Thanks for chimimg in. I wish the graviton did actual LSB & MSB changes but I do have to put in 3 seperate commands
CC01 = LSB (Bank Select)
CC32 = MSB
PC = Patch #
bank # MSB LSB Bank Select PC
A 001 85 0 10880 1 SCENE
Im going by this data base
https://www.netweters.nl/roland/scenes.php

Do I need this 10880 number in there?

Re: LSB/MSB to change scenes

6 Mar 2025, 14:46

As already mentioned, you are using the wrong CC numbers. I said that MSB is wrong. However, actually both MSB and LSB are wrong. You can find the correct CC numbers for example here: https://midi.org/midi-1-0-control-change-messages