Fantom-S and Fantom-X

Fantom Froze

Fantom Froze

20 Dec 2004, 18:59
Quick question...my fantom s keeps freezing on me..not all the time but enough...does anyone else have this problem....and would the update fix this problem?
thanx

Re: Fantom Froze

21 Dec 2004, 01:15
never so far. have you expanded the memory? do you have any SRX cards installed? any smartmedia cards in the slot? any llightening storms recently or static in that room? How long have you had it? Contact the dealer as well.

Re: Fantom Froze

21 Dec 2004, 04:48
Pure, as sami points, maybe it's a matter of some
card you plugged into the X: most likely, a not 100%
compatible (or defective) RAM stick.

let us know

greets

Re: Fantom Froze

21 Dec 2004, 22:03
yea the Memory is 128, i have one card the supreme dance but maybe i should trade it in or something for a newer FS

Re: Fantom Froze

21 Dec 2004, 22:50
Try removing both the RAM and the card and see if the Fantom continues to freeze. If not, then put the expansion card back in and try for a while to see if it freezes. If it still doesn't freeze, then the RAM was the cause. If it begins to freeze again after installing the expansion card, the card is defective (or there is a problem with the Fantom's expansion slot) and I'd suggest trying a different expansion slot or replacing the expansion card.

Regards,

Nathan Sheldon
http://www.nathansheldon.com/
Regards,

Nathan Sheldon
http://www.nathansheldon.com/

Re: Fantom Froze

22 Dec 2004, 02:06
One possible reason for freezing is heat, do you have your fantom near a heat source?
I don't see it impossible for the fantom control chip to freeze due to overheating. They don't have heatspreaders or fans in keyboards afterall, or it could be damaged or shoddy components.

___________________________________
Shows you not to hurry, there is a typo on my screen name, hehe.
___________________________________
Shows you not to hurry, there is a typo on my screen name, hehe.

Re: Fantom Froze

3 Jan 2005, 17:52
Sometimes my fantom gets stuck when Media Card is pluged in and I'm starting my workstation. I have to remove it, turn Fantom on and put Media Card in.

← Back to Fantom-S and Fantom-X