MC707 / MC101

mc707 1.81 - feature request: Track Delay

mc707 1.81 - feature request: Track Delay

9 Mar 2023, 05:36
it could be very useful if there was in Track Settings/GENERAL a Delay option in milliseconds(like in YAMAHA 01 mixing console) ,

since you can assign incoming signal to a track, automaticaly internal tracks can be off time a little bit,
so it could be great if one could delay a internal tracks (DRUM,TONE,LOOPER) to match with track that is assigned to EXT,PC,RETURN

otherwise time shifts are pretty audible and maybe not desired.

i think up to 20 msec would be enough

i attach example
TRACK 1 with INSERT point on EXT IN from synth, triggered via midi sequence of that same track TRACK 1
TRACK 2 Drum track default kit ,Kick pad

both tracks simple sequence 4x4 ,
first you can hear track 1 then track 2,and then both in the mix ,also a little fades between to give idea

as you probably hear ,kick drums are not right in time due to little bit of lag of TRACK 1,this is where independent Delay for each track could help

bests
k
Attachments
ext track lag mc707.mp3 (1.4 MB, 155 downloads) · file not available

Re: mc707 1.81 - feature request: Track Delay

13 Mar 2023, 11:26
+1
in midi ticks
Trackdelay would also be important for groove.
LAID AND RUSHBEAT etc..............

Re: mc707 1.81 - feature request: Track Delay

13 Mar 2023, 13:27
thank you ,exactly,or in midi ticks also ,why not
Trackdelay would also be important for groove.
i forgot to mention that as well ...

Re: mc707 1.81 - feature request: Track Delay

13 Mar 2023, 16:28
and therefore also for drum pads please...

Re: mc707 1.81 - feature request: Track Delay

13 Mar 2023, 17:25
I use the quantise, or microshift the recorded tracks notes if it's out, or if there is MIDI delay going back to the connected synth. It's a bit long-winded but it works. Another way round the delay is to sample the track of the incoming notes (to the system RAM, not the looper). You can then play the recording back on a drum pad, and microshift it, or move the sample's start point in the edit screen.

Re: mc707 1.81 - feature request: Track Delay

15 Mar 2023, 08:47
GMayle wrote:
I use the quantise, or microshift the recorded tracks notes if it's out, or if there is MIDI delay going back to the connected synth. It's a bit long-winded but it works. Another way round the delay is to sample the track of the incoming notes (to the system RAM, not the looper). You can then play the recording back on a drum pad, and microshift it, or move the sample's start point in the edit screen.
great
I route certain sounds to rear audio boxes. the other distance creates a delay. it's a little cumbersome but works,
because I live in a castle and have a different room for every sound.

Re: mc707 1.81 - feature request: Track Delay

25 Mar 2023, 13:53
Yeah, it is difficult with the way your castle is setup 😁 but it's unlikely Roland will add a track delay to the MC707, so here's what I'd do. The inputted audio I would use only for pads etc that aren't millisecond-critical. Other stuff, I'd sample and put it on a drum pad where you can microshift it back or forward. Decades ago, I had a home studio with endless MIDI delay/timing problems. I tried all manner of MIDI hubs etc to sync it all. In the end I bought a sampler and just recorded it all, and it lost a little spontaneity, but saved me from a mental hospital trying to get it all in sync 😁

Re: mc707 1.81 - feature request: Track Delay

27 Mar 2023, 12:45
Thanks, but that's not my working way. I only need delay for groove and midi interactive. Roland will install them, because they already had them.

← Back to MC707 / MC101