Fantom Platform

Multi sample with Loop point

Multi sample with Loop point

7 Jun 2022, 01:36
Hi Everyone, I’m new here: I’ve just purchased a Fantom 8 and I already need some help since I’m approaching this new “monster” and I’m trying to get confident with a new “language”.
I am not a complete noob in this Keyboards’ programming, but I’m stuck with a quite basic function which I cannot handle.
I imported samples and correctly layered them across the keys, but I’m not able to set the loop point properly. With my previous gear, I was used to import samples saved with “Endless Wave” which gave me the opportunity to export also the data concerning start, end and loop point. It seems my Fantom doesn’t recognise the data embedded in the .wav files and I must set the loop point manually but, with some samples, is really complicated. Do you have any suggestions? Are there any program (iOS) I can use that are recognised by the Fantom? Is there any function within the sample editor? Thanks in advance

Re: Multi sample with Loop point

7 Jun 2022, 07:48
😀😀😀😀

McFly, I have just used the sampling features a couple of times, the first one for some genuine applauses (🤭🙄) and the second one to recover a conch seashell used some 18000 years ago.
https://arstechnica.com/science/2021/02/listen-to-haunting-notes-from-an-18000-year-old-conch-shell-trumpet/

But I remember there is a function to edit the wave.

If I am not wrong, a single wave can last around a bit longer than three minutes and a few seconds, or so. After that you are advised it is too long to be saved.

Then a given part of that wave can be selected via fixing the starting point, the ending point and even a loop point.

So from a wave lasting 02:00 minutes you could select a part to start from mark 00:55, reach the end at 01:15, return to the loop point at say 01:02 and then end at 01:15. Even the loop can be repeated, if I remember well.
The edited part can be saved afterwards with a different name so that the original is untouched.

[attachment: Editing a sample P70.jpg]
[attachment: Editing a sample P71.jpg]
[attachment: Editing a sample P72.jpg]
🎹🎹🎹🎹
Attachments
Editing a sample P70.jpg (729 KB, 3113 downloads) · file not available
Editing a sample P71.jpg (646 KB, 3113 downloads) · file not available
Editing a sample P72.jpg (723 KB, 3108 downloads) · file not available

Re: Multi sample with Loop point

7 Jun 2022, 16:30
Hi FGM and thank you very much for your time and support. I’m sorry for the confusion, but I think I have been misinterpreted. I found the “wave edit” function but, here, you are supposed to set start/stop/loop points manually. Of course you can search the correct and smoothest “transition point” by ear but, with some samples, is really complicated and, no matter how much I try, I always get an “imperfection”. With such software (I.e. endless wave) there’s an automatic function which detects for the best point in order to obtain a clean and smooth transition: once saved and exported the file this “meta data” remains embedded within the samples and, with my previous keyboard (Kurzweil PC4), it was automatically recognised and set.

Re: Multi sample with Loop point

8 Jun 2022, 01:29
Understood.

Anyway, that searched smooth transition point might not necessarily exist.

Say you sample the beautiful D3 being sounded by s cruise ship horn at a distance and the recording has a continuous loudness of 85 dB from beginning to end.

After sampling, you are to set the envelopes accordingly for the appropriate display of the sound.

Re: Multi sample with Loop point

8 Jun 2022, 01:30
I think you have to adjust the looping point manually until there is no clicking and it sounds ok. Have a look here:
https://youtu.be/V-NgoVwZlnU?t=971

Unfortunately, I don't know about a third party program that is recognized by Fantom. Personally I only use samples I have recorded myself and make them long enough to avoid looping.

Re: Multi sample with Loop point

9 Jun 2022, 13:27
McFly wrote:
Hi FGM and thank you very much for your time and support. I’m sorry for the confusion, but I think I have been misinterpreted. I found the “wave edit” function but, here, you are supposed to set start/stop/loop points manually. Of course you can search the correct and smoothest “transition point” by ear but, with some samples, is really complicated and, no matter how much I try, I always get an “imperfection”. With such software (I.e. endless wave) there’s an automatic function which detects for the best point in order to obtain a clean and smooth transition: once saved and exported the file this “meta data” remains embedded within the samples and, with my previous keyboard (Kurzweil PC4), it was automatically recognised and set.
McFly - you found, IMHO, the sore spot of Roland's sampling: no crossfade.

You found the second one too: wave file import does not recognize the metadata which may contain loop info.

These are my biggest disappointments with the new Fantom. Basically, I don't use the Fantom for any sampling unless it's a one-shot sound. Grrrr!

What's really baffling about not including the ability to crossfade a sample is that Roland's first samplers DID allow for crossfading. To me, this is a big sin of Roland's. One could argue that this is not a sampler, i.e. mostly a synth, and that none of the previous Fantoms had crossfading either, so, par for the course. But C'mon, man! Why bother with sampling, especially since they included sample mapping and multisamples after the initial release, if you're not going to fully accommodate those samples as a playable instrument??!! So - it's just a way of getting custom drum sounds??

Secondly, yeah...the only way to get the metadata of the loop position is to convert those waves into an SF2, and then import that into the Roland using their conversion software.

But here too, another disappointing fact: importing a sound font only imports the wave files. IT DOESN'T MAP THE SAMPLES!!! AhhhhhhhH!!!!!! ROLAND, YOU FOOLS!!!! You want to make your own piano sound with multiple keys and velocity layers?? You're insane, then! You will need to map EACH AND EVERY SAMPLE MANUALLY WITH ROLAND'S CLUNKY INTERFACE.

F'ing fix this Roland!!!

Now...there is a rumor a certain sample translation company is working on a method of importing samples formatted for the Fantom in which you build the instrument and upload it, mapping and loops included. I'm not saying which company as it may not materialize...I don't want to jinx it. But, I'll be the first to let anyone know if it comes to fruition. You might find out who it is...I've seen it mentioned in this forum sometime in the past.

Don't get started on time stretching or tempo detection of loops (V-Synth had it)....again, half-ass Roland....

Re: Multi sample with Loop point

15 Jun 2022, 09:39
Hi EdGe, and thanks for your support.
Of course i don't expect the Fantom to be a mere sampler but,as you mentioned, Roland implemeted an entire sampling interface which is, in some points, really conveninet and smart and, IMHO, i find really stupid they didn't think about some fucntion as, for example, crossfade which is ESSENTIAL!
Another thing, i found uncofnrtable, is the face there is not possibility to link a determind "PAD's BANK" to certain SCENE: i often use samples, and i have already fullfilled all the 16x4 locations, given by the 4 banks, but it would be really easier to associate each or multiple scene to a specific pad's bank without recalling it manually.

Re: Multi sample with Loop point

15 Jun 2022, 16:09
McFly wrote:
...[SNIP] there is not possibility to link a determind "PAD's BANK" to certain SCENE: i often use samples, and i have already fullfilled all the 16x4 locations, given by the 4 banks, but it would be really easier to associate each or multiple scene to a specific pad's bank without recalling it manually.
BOOM! You found another landmine! Well done! :)

As you discovered, the pad samples exist outside the scenes, i.e. there is no "per scene" sample assignment. Again Roland, What the heck?

You may not come across this landmine...so let me warn you: the audio input say, you want to set up a vocoder, is also not assigned to a scene...and the input is "on" by default...I was trying to use the vocoder live and found this to be a sore limitation. Uggghh!!!

← Back to Fantom Platform