Fantom-S and Fantom-X

Problem with the finish of my X8

Problem with the finish of my X8

7 Dec 2004, 18:50
Hello,

Has anyone had a problem with the finish of the aluminum shell of the Fantom X8. I just received mine, and everywhere it has been touched you can see a difference in the finish. I don't have oily hands or anything either. For example I don't have to change guitar strings until they break. Any thoughts?

Steve
Steve

Re: Problem with the finish of my X8

8 Dec 2004, 13:21
Another forum member bought an X8 in Hong Kong and had a similar problem. See the following thread: http://forum.fantomized.info/?action=show_thread&thread=4806&fid=0&page=last

Good luck.

-------------------------------------------
Their are 3 errors inn this statement.
-------------------------------------------
Gear: Does it really matter?

Re: Problem with the finish of my X8

8 Dec 2004, 16:37
i bought mine in Hong Kong from Tom Lee Music, I am very happy with it. I have not had a problem with colour etc. It is brushed stanless steel, same as the Delorean sports car from the Back to the Future movies. If youtouch it, lean on it etc you will leave a mark, but you can easily wipe it off with a damp soft cloth (hardly wet at all) or you can use your own breath and breath on it so it condensates then wipe it off (wipe with the grain, not against) this is what I do after each time i use it, and after 4 weeks now it still looks 100% and beautiful!

if you take the extra 5 mins to keep it clean, it will look 100% always.

James - Sydney, Australia

Gear: Roland Fantom X8 with 4 Srx cards, Behringer 2031B monitors, Apex AX48B
James - Sydney, Australia

Gear: Roland Fantom X8 with 4 Srx cards, Behringer 2031B monitors, Apex AX48B

Re: Problem with the finish of my X8

8 Dec 2004, 20:03
waynester- could it be your hair gel ?

GregC
GregC
Try just a small touch of furniture polish. It works great on mine

Re: Problem with the finish of my X8

12 Dec 2004, 09:58
Mine's the same I think - the finish is really patchy. I considered sending it back, but I'd waited a month for it and didn't want to part with it!

http://www.m3fe.com/~paul/fantom_x8_yuck1.jpg
http://www.m3fe.com/~paul/fantom_x8_yuck2.jpg

--
Paul Roberts
http://www.m3fe.com/
Paul Roberts
http://www.m3fe.com/
Roland Fantom-X8, SRX-11, XV-2020, Yamaha P-80, M Audio Ozone
trust me. spray a very small amount of furniture polish on it and wipe with a clean cloth.
trust me. spray a very small amount of furniture polish on it and wipe with a clean cloth.

Info from my call to Roland

12 Dec 2004, 13:52
Sorry for not getting back for so long on this thread.....

I talked to Roland....surprise surprise they have not heard of this issue at all. They told me to use Windex on a rag and wipe it down. Didn't work. I may have to send it back. To Rolands credit they said they would take care of it if I wanted it fixed.

Steve
Steve

Mine looks exactly the same

12 Dec 2004, 13:55
That's exactly what I'm talking about PW!

Steve
Steve

greasy finish

13 Dec 2004, 21:36
they dont care .it's just finger prints are you really serious.i hope most roland users aren't that dumb

← Back to Fantom-S and Fantom-X