Fantom Platform

Uggghh. Can't get MIDI / Logic working again

Uggghh. Can't get MIDI / Logic working again

31 Dec 2021, 21:51
I feel stupid. Had my Fantom 8 for 2 weeks, was using Logic Pro (Mac Mini M1 on Monterey) to record/edit/play MIDI and making great progress. But I never installed the Roland drivers, so I think that was preventing me from recording audio tracks in Logic, so I can bounce them to mp3.

So -- I installed the USB driver tonight, from Roland. And I also installed Rosetta 2 and then installed the Logic Pro plugin/driver, and bring up Logic Pro in Rosetta now.

Good news -- the DAW control works great now.
VERY BAD NEWS -- I can no longer get any sound out of the Fantom when I set the System => Sound setting to OFF (to be controlled by Logic). Once I do that, I can no longer get any sound out of the Fantom. And of course no MIDI from Fantom to the Mac/Logic.

>> Help??? I assume I must have some setting wrong. I've done everything I know, including:

- Set Mac System Preferences => Sound => Input and Output to Fantom 6-7-8
- Set Fantom System => General => USB Driver to VENDOR
- Set Fantom System => USB => Audio to PARALLEL
- Set Logic input and output to Fantom 6-7-8 DAW Control

I'm so frustrated!

Re: Uggghh. Can't get MIDI / Logic working again

1 Jan 2022, 22:23
napsfan:

Just a tip. (I use Windows Laptops) but, please check on Fantom at SYSTEM MENU->USB "USB AUDIO"
USB Audio IN/OUT Select : OUT

USB AUDIO Intput Switch: ON
USB AUDIO Output Switch: ON (<-- This is the important one)

USB Level (both In/out) : 50 (to start at the mid scale. then adjust it at your needs).

Dont forget to Save (Write) these changes to keep them after new boot
Happy New Year,
Flavio

Re: Uggghh. Can't get MIDI / Logic working again

1 Jan 2022, 23:11
Thanks for the tip, Flavio. Indeed, I have those settings.

My MIDI recording to Logic Pro, and playback through Fantom, is fine as long as I haven't installed that Roland driver. Problem is, we can't record audio tracks to Logic without that USB Driver. And I'm now suspecting that the USB Driver just isn't compatible with Mac M1. Once I uninstall that, things are working again. But without it, I can't record any audio tracks.

So unless others are using Mac M1 and tell me they are successfully recording audio tracks with that Roland USB Driver installed (that'd be great to hear!), then my options seem to be to change my hardware to an Intel-based Mac, or I'm wondering whether Fantom allows us to record audio tracks onto a USB flash drive (which I could then manually import into Logic).

Re: Uggghh. Can't get MIDI / Logic working again

9 Feb 2022, 06:30
Hi!
For me M1 Monterey with USB driver (1.0.3):
- audio recording works
- external midi doesn't work.

I also have an Intel-macbook with the same USB driver and exactly the same settings -> everything works.
So I guess I'll
- wait for the next driver version, OR
- sell my M1 mac. :(

-Jani

Re: Uggghh. Can't get MIDI / Logic working again

9 Feb 2022, 12:59
Look, ma: M2 is around the corner.

Re: Uggghh. Can't get MIDI / Logic working again

15 Jun 2022, 08:45
Hi folks, i need to relauch this topic because it seems to be the most aligned to my needs.
I'm experiencing a behaviour which i cannot explain and bypass.
When in Scene Mode (the only one actually) i cannot send midi messages out from my Fantom to my laptop (McBook Air, M1) unless i set, first, the "SINGLE TONE" function and then, back, to SCENE MODE. In this way i am able to "communicate" only in the channel set previously, but i loose midi connection once i change scene. In my gear i implemented a software (Camelot Pro) which the function is to send program changes and i usually set a foot-switch with the aim to launch the signal but, as mentioned above, i cannot exchange any midi communication out from the keyboard.
Do i need to create, in every single scene, a "dummy" layer, set to EXT, with this puropose?
Thanks in advance

Re: Uggghh. Can't get MIDI / Logic working again

15 Jun 2022, 09:50
Thanks FGM, i have already watched almost all the material you suggested, but and i'm asking here precisely because i haven't already found a satisfactory answer to my question. Moreover i'm not using LOGIC, in that case i found the "DAW CONTROL" function really convenient.

Re: Uggghh. Can't get MIDI / Logic working again

15 Jun 2022, 09:54
I have so far not used any DAW but I understand MIDI in/out calls for EXT to be set on a zone or on as many as needed, or BOTH if using ADVANCED under SYSTEM settings.

And I guess the settings shown in the videos are basic and also the very same for Nuendo, Logic, Ableton, Cubase or whatever.

Also....
Attachments
System Parameters.jpg (225 KB, 5039 downloads) · file not available

Re: Uggghh. Can't get MIDI / Logic working again

15 Jun 2022, 13:06
As FGM mentioned, it sounds as if it is related to EXT.

You posted in the Fantom Platform forum. I assume that you own a Fantom-6, 7 or 8, and not a 06, 07, 08, correct?

I am guessing that it is related to the "zone int/ext control" status. The 8 buttons right above the sliders on the left side indicate the status of "zone int/ext control" for each zone (1-8 and 9-16, depending on the corresponding button). They can be in 4 different states: off, red, green and orange.

The Single-Tone button initializes the current (edit) scene, and it switches all 16 zones to "off". In this state, only the selected zone (highlighted on the display) will sound locally, and it will also send midi messages on the corresponding MIDI channel.

Most factory scenes have some zones set to "red" and all others to "off". If one of the "red" zones is the selected zone, then all "red" zones will sound locally, and no MIDI messages will be sent to the computer.

Based on your description, I guess that is what you are seeing.

If this is the case, then try pressing the "zone int/ext control" buttons while holding the shift button. The color/state of the corresponding zone will change. And if it is "green" or "orange", then it will send MIDI messages to the computer.

The detailed behavior depends on other settings. It was changed with version 2.00, and it is documented in the "FANTOM-6/FANTOM-7/FANTOM-8 VERSION 2.00 SUPPLEMENTARY MANUAL".

Re: Uggghh. Can't get MIDI / Logic working again

15 Jun 2022, 14:17
xp30, back from the Moon or still there ?

😀😀😀😀

Re: Uggghh. Can't get MIDI / Logic working again

16 Jun 2022, 06:47
Thank you very much FGM and XP30! Starting from your considerations, yestarday i had some time to dive in the menu and i, finally, understood the logic behind a SCENE: all the 16 midi channels are ready to receive/send midi messages, you are only supposed to "teach" them their specific tasks.
I created an initialized scene, which i use as a base for alla my scenes, in which i set the first 8 layers in order to ONLY play internal sounds (red light) and the 16th layer to send midi messages out (GREEN LIGHT).

← Back to Fantom Platform