Fantom Platform

How to import MIDI clips to specific pattern

How to import MIDI clips to specific pattern

5 Jul 2020, 13:02
I have a bunch of MIDI clips on a USB stick.

How do I import them to a specific place in the pattern sequencer?

When I do:

1. Press PTN UTILITY
2. Cursor to pattern I want to import clip to, for example A3
3. Click IMPORT
4. Select a MIDI file from USB stick
5. Set START and LENGTH and DESTINATION to "A".

why does the imported clips always end up at A1 and not A3 which was the selected pattern when i pressed IMPORT?

What am I missing?

Re: How to import MIDI clips to specific pattern

8 Jul 2020, 17:37
Hi ogg1980:

I read the reference manual on importing MIDI files in the pattern utilities option. I did not find any information about being able to select the destination zone. I tried to change the MIDI channels associated to each one in a scene, without success. My recommendation is that you contact Roland support. They are not very quick to respond, but they do. Apologies for not being able to provide a solution

Re: How to import MIDI clips to specific pattern

13 Oct 2021, 15:41
This is driving me nuts.

Why is this made to be so cumbersome?

What you'd expect is:

1. higlight a pattern slot
2. ptn utility
3. import
3. select file
4. click import.

But reality is:

1. Ptn utlity
2. click Import
3. select a file
4. select a target pattern. in practise only pattern H is usable (or a "clean" pattern lane) since it will OVERWRITE everything on channels 2 and up (wtf?)
5. click import
6. click ptn utility
7. copy
8. arrow to destination
9. paste

10. arrow back to where you imported to
11. click ptn utility
12. delete.

10-12 optional and you can skip those and overwrite, if you have multiple clips to import. But, anyway. This is not impressive, at all. Also. If you have stuff on channels 2 and up on pattern lane H, you are out of luck. No way to import without clearing H2-16.

Also, when you copy paste patterns. It shows all 16 tracks without clip names. So, you better have a good memory, if you're overwriting stuff. Really easy to paste over the wrong thing. Of course you can exit out of PTN utility and back again. But, it is annoying. If i were tasked to fix this annoyance; I'd show the pattern name in the warning that pops up when you paste over something. "You are about to overwrite pattern XYZ". Easy.

Good thing this red beast at least sounds good =D. Best synth I've owned so far...

Re: How to import MIDI clips to specific pattern

15 Oct 2021, 05:52
From my useage of the SMF Import function , if zone 3 is still set to midi channel 3 (from the factory) then only midi data on midi channel 3 will get imported to a cell on column 3. If the data consistently goes to column/zone 1 then the data being imported is set to channel 1..... I believe .

← Back to Fantom Platform