Glitchy sliders
4 Jan 2016, 05:18I have some faders that jump and some are bit unresponsive. I can work around it no problem with the valuewheel or mouse still it would be nice to have them pristine
is there some definitive fix for this problem? without disasembling the unit, cause im not gonna that.
ive googled around. And I find it a bit inconclusive. some say 1) compressed air 2) use deoxit fader lube, contactsprays etc......some say dont use any lubricants it makes the problem worse, its temporary at best
i did use compressed air to blow debris out the slide. indeed some dust/cottonball thingies came out but the problem isnt solved but im a bit afraid to do the next step in those DIY.
Since I got the unit the sliders (sliders were okay) have not been used heavy, so if its wear and tear it wasnt me. (but maybe the last owner left them on the brink of normal operation and failure) they started acting up a bit around the same time. Im not really familiar with how the sliders work. does the manufacturer use some kind lubricant that can dry out after a while and you can fix this by adding a little?
is there some definitive fix for this problem? without disasembling the unit, cause im not gonna that.
ive googled around. And I find it a bit inconclusive. some say 1) compressed air 2) use deoxit fader lube, contactsprays etc......some say dont use any lubricants it makes the problem worse, its temporary at best
i did use compressed air to blow debris out the slide. indeed some dust/cottonball thingies came out but the problem isnt solved but im a bit afraid to do the next step in those DIY.
Since I got the unit the sliders (sliders were okay) have not been used heavy, so if its wear and tear it wasnt me. (but maybe the last owner left them on the brink of normal operation and failure) they started acting up a bit around the same time. Im not really familiar with how the sliders work. does the manufacturer use some kind lubricant that can dry out after a while and you can fix this by adding a little?
