Replaced RD2000 with Fantom 8, pedal activation?
15 Sep 2019, 23:53I had an RD2000 with the RPU-3 pedal unit. I now have a Fantom 8.
The Right Pedal is hooking into Hold. This one works fine.
Center Pedal is hooked into CTRL 3/C, and set to Sustano in the menu
Left Pedal is hooked into CTRL 2/R, and is set to soft.
I set the Pedals to SYS. Scene was the other option.
I select the A.piano.
The hold pedal seems to work no matter what. SYS or Scene. The other two do not.
Any suggestions, or pointers to documetnation? According to the reference guide, I should have this right.
The Right Pedal is hooking into Hold. This one works fine.
Center Pedal is hooked into CTRL 3/C, and set to Sustano in the menu
Left Pedal is hooked into CTRL 2/R, and is set to soft.
I set the Pedals to SYS. Scene was the other option.
I select the A.piano.
The hold pedal seems to work no matter what. SYS or Scene. The other two do not.
Any suggestions, or pointers to documetnation? According to the reference guide, I should have this right.