FA-06 / FA-07 / FA-08

fa08 questions

fa08 questions

24 Jun 2018, 13:33
Hi, I'm considering either the fa08 or junods88 to complement my nord lead a1, and I was wondering if you could shed some light on a few points:

can i record a track on the fa08 sequencer which is being played on the nla1 via midi?

can I listen to the nla1 through the fa08 by connecting it to the ext input?
this would save me getting an audio interface I think.
if this worked, is ext input routed to both outputs as well as headphones?

when connecting it to a pc via usb for recording, is the output of the keyboard the same as if I was using a daw, driven by the pc? i might be saying something stupid, I'm a newbie when it comes down to daws.

many thanks
Luca

Re: fa08 questions

25 Jun 2018, 19:03
luckyluca wrote:

can i record a track on the fa08 sequencer which is being played on the nla1 via midi?
Yes. But, it would probably be a good idea to sync the tempo so they run at the same speed. You could set them both to "120" or whatever the tempo is on the original and hope for the best (and quantize will fix it).
can I listen to the nla1 through the fa08 by connecting it to the ext input?
Yes. If the Nord has typical 1/4" stereo outputs, you could connect a cable that has two 1/4' TS at one end and a 3.5 mm stereo mini-plug at the other. That sound "passes through" the FA and comes out the Headphones and Stereo Jacks. You can also sample from there.

I can't remember off hand if this comes through the "audio input" section and is affected by that level control (on screen) and if signal from here can be routed through the TFX or not.

But definitely basic sound out from Nord, passes through to Headphone and Speaker outputs.


this would save me getting an audio interface I think.
if this worked, is ext input routed to both outputs as well as headphones?
Yes, but, I'm not positive if the USB Audio includes this in the path. It probably does as that USB audio out mirrors any sound the FA makes. So it may be a direct mirror of the output jacks and if that's the case, yes you could record audio over usb from the Nord this way. I'm 99% sure it does, but don't want to say 100% without checking it.
when connecting it to a pc via usb for recording, is the output of the keyboard the same as if I was using a daw, driven by the pc? i might be saying something stupid, I'm a newbie when it comes down to daws.
I'm not quite sure what you're asking here.

The output of the Audio over USB cable is Digital, at some really good sample rate.

So in theory, it would be "better" than what you'd get from the Analog Audio Outs, which you'd run through an Interface anyway.

The Nord will of course already be Analog because of the cable, so you're not really getting any better or worse signal of it.

If you're asking if, when using a DAW, the sounds from the keyboard are as good as the sound from a Plug-In (VSTi, Software Instrument, Softsynth, whatever you call it) then that totally depends on the Plug-In.

Some VSTs are top notch, others are "you get what you pay for" kind of deals. But the sounds of the FA really are top notch and have no more oddities than any other Plug-In.

What the FA (and Nord) do for you is allow to offload your computer's CPU so you can devote that to other tasks (like running effects or automation) while the keyboards themselves make the sounds.

Now, if you're asking if the FA's own sequencer's audio output is as good as what a DAW would see from the USB cable, then use.

If you like the Sequencer in the FA, you'd be better off to use it exclusively. You can bring in whatever sounds you record or sequence in from the Nord, and add in tracks from the FA. Of course, you are limited to a total of 16.

You could totally cheat though and record a sequence into one of the sample pads as audio from the Nord - basically making an audio mixdown from the Nord, and then still have 15 tracks to work with on the FA using its own sounds (or anything else you'd want to record from the Nord.

You can import and export wav and mid files into and out of the FA. So there are actually a number of ways you could do things between the two devices with limited use of a DAW if you wanted to. But using a DAW just makes things so much easier (bigger screen to work on!).

HTH

Re: fa08 questions

7 Jul 2018, 18:31
thanks for the thorough reply, I'm honestly not sure, from reading my post, what I was asking in my last point myself. sorry.

In the end I opted for the Juno ds 88

happy Sunday

Re: fa08 questions

14 Jul 2018, 08:17
luckyluca wrote:
thanks for the thorough reply, I'm honestly not sure, from reading my post, what I was asking in my last point myself. sorry.

In the end I opted for the Juno ds 88

happy Sunday
funny the forum doesn't allow editing my old post.
Just to follow up on this,
I saw a review on Amazon. co.uk which specifically mentioned some of the limitations of the fa08 were:

the wav audio export doesn't record both audio produced by midi tracks and sampler together.
presumably the same might be true about live audio coming from the line in.
so you may need to record audio in to a pad first and play it back to record it.

and lastly do you think a fa08 replacement might be around the corner? I would hate to purchase one now and have a new model coming out in a couple of months time.
what do you think?

Re: fa08 questions

15 Jul 2018, 23:58
luckyluca wrote:

the wav audio export doesn't record both audio produced by midi tracks and sampler together.
presumably the same might be true about live audio coming from the line in.
so you may need to record audio in to a pad first and play it back to record it.
I'm not sure what you mean. If you play a sample within the sequence, it doesn't get mixed down to the wav file?

I would assume the live audio doesn't get mixed down though. Yes, I would think you'd have to record audio to a sample pad, and trigger the sample pad in the sequnce to have it mixed in with the wav file - what you first said above is contrary to that, but I've not tried it.
and lastly do you think a fa08 replacement might be around the corner? I would hate to purchase one now and have a new model coming out in a couple of months time.
what do you think?
I thought you got the Juno?

I don't keep up with that kind of stuff but there's no real way to prevent it. You have to take your chances.

Re: fa08 questions

16 Jul 2018, 11:10
stevel wrote:
luckyluca wrote:

the wav audio export doesn't record both audio produced by midi tracks and sampler together.
presumably the same might be true about live audio coming from the line in.
so you may need to record audio in to a pad first and play it back to record it.
I'm not sure what you mean. If you play a sample within the sequence, it doesn't get mixed down to the wav file?

I would assume the live audio doesn't get mixed down though. Yes, I would think you'd have to record audio to a sample pad, and trigger the sample pad in the sequnce to have it mixed in with the wav file - what you first said above is contrary to that, but I've not tried it.
and lastly do you think a fa08 replacement might be around the corner? I would hate to purchase one now and have a new model coming out in a couple of months time.
what do you think?
I thought you got the Juno?

I don't keep up with that kind of stuff but there's no real way to prevent it. You have to take your chances.
Thanks for all your help Stevel, I did in fact, but I ended up cancelling the order as for a series of events I won't be able to dedicate any time to it in upcoming weeks and assess whether it's suitable for me.
I decided to take a pause, digest all the infos I'm gathering and attempt again in the fall

← Back to FA-06 / FA-07 / FA-08