(Sorry for the delay in replying - I don't visit the site very often, and I don't get notification emails on topics...)
I'm not sure if you have solved your problem or not?
I will try to list everything you need to do in steps - it was confusing to me at first, but now I can Plug-Out or add banks without looking at the instructions. I should mention I am running a Windows PC.
1) Download the very helpful 64 patches listed at the beginning of this topic. When you unzip this file, you will see a folder.
Inside this folder there is a list of 64 patches called SYSTEM1_PATCH1.PRM, SYSTEM1_PATCH2.PRM, etc...
We are going to use those 64 files.
2) Plug a USB cable into your System 1, and the other end into a USB slot on your computer. Please ensure you have the System 1 drivers installed on your computer. You will be able to find the drivers on the Roland site, but let us know if you have problems locating them.
3) While holding down the button called "arpeggio" on your System 1, turn the power button on the System 1 to ON.
4) After about 30 seconds (or probably sooner), you will see a new drive (or folder) open on your computer. You can see this drive by using Windows explorer or something, but it will appear on your root directory. It will be titled SYSTEM-1 (F:) (it might be a different letter as well such as D:, E; etc..)
Let us know if you do not see this drive/folder appear.
5) If you click on this SYSTEM-1 drive letter, it will open up and show you two folders. One is called RESTORE and the other is called BACKUP. Click on the RESTORE folder and it will open. This RESTORE folder will be empty.
6) Find the 64 patches you downloaded earlier (From step 1)
Copy the 64 patches ( SYSTEM1_PATCH1.PRM, SYSTEM1_PATCH2.PRM, etc ...) into the RESTORE folder. You can click on all the 64 patches at once and select "copy" or do what you need to do to transfer them to the RESTORE folder. This should only take about 10 seconds until they are all in the RESTORE folder.
Do not copy the "Roland Sound Banks 1-4" folder into RESTORE....we want the individual 64 patches copied there.
7) Once the 64 files are added, "right-click" the SYSTEM-1 (F:) drive in Windows explorer (or your root directory) and select "Eject". The SYSTEM-1 drive icon will disappear.
Make sure you understand and do this step. Let us know if you do not see or understand this part.
8) Disconnect the USB cable from your System 1 keyboard. You can remove the USB cable from your computer as well, or just remove the cable entirely.
9) Now you will see on your System 1 synthesizer, the Octave UP and DOWN buttons will be flashing.
Leave the System 1 powered on, and relax for a couple of minutes. Very shortly you will see these UP and
DOWN buttons stop flashing, which means the patches have loaded and written into your System 1.
10) Power off your System 1, and then turn it on again. You now have the 64 System 1 patches added to your System 1 synthesizer.
Please let us know if you need help selecting the different banks.
I hope this is helpful!