Yes 5 pin din midi is where the problem is, I am not using a PC and I do not want to use a PC.
So lets say I have a hardware midi sequencer connected to the MX-1 5 pin din midi in, the MX-1 can sync to the hardware sequencer, so can any aira or boutique synths connected to the aira link USB ports, BUT all other midi data sent from the hardware sequencer is not routed to the aira link ports, only sync, so if I want to sequence them from the hardware sequencer I have to add 4 midi cables and a midi thru box.
The thing about it is that the MX-1 must be filtering all other midi data from the 5 pin din, which means that it is a firmware decision, at the very least it should be a user option to decide if you want to block all except sync being passed thru.
In a hardware only setup like mine, it makes the MX-1 almost useless as a midi device.
I have 2 JX03, 2 JU08, 1 JU06, 1 VP03, 1 TR09, 2 TB03, Scooper, Bitrazer, Demora, Torcido, SBX1, MX1.
So I was going to add another 2 MX1 to allow me to have everything connected, but this inability to route midi has put my plans on hold until I hear back from Roland. Had I know all of this prior to purchase then I would not have bought most of this stuff, because without a DAW it can't be sequenced without adding a thru box and more cables, which is defeating the object of a hardware setup using aira link.