corvax wrote:
Thanks! Will try today
Cheers!
Corvax, just to expand:
If you wanted an Electric Piano with both Flange and Tremolo and there was no single "multi-effect" kind of effect that had both (and it is correct, you are only allowed one MFX per part), you'd have to put the Flange in as an MFX on the part, and then the Tremolo in as TFX on the Studio Set (or vice versa depending on the order you want and the availability of those effects as each kind).
I am REALLY disappointed in the effects implementation in the FA, and MFX in particular.
Roland idiotically made the MFX stuff basically inaccessible with the instrument itself, other than going through menus (for example, you can't simply turn a Tremolo on an Electric Piano on and off with the MFX - it has to be controlled remotely via a SysEx message, or you have to manually do it on that particular screen on the display).
However, I will say it's been pretty traditional in Synths not to be able to have chains of FX - instead they usually just allow one instance of an effect, but some of those effects themselves may have multiple components in them (like distortion, flange, and delay for a guitar type effect).
So the trick is to find the right multi-effect and set the parameters to what you need.
You should definitely be able to assign a controller message to control the Wah of a wah pedal even if it's in a multi-effect because you can select one parameter with the CC message to adjust (it's if you need to adjust multiple parameters at once where you run into trouble).
But yeah - don't forget the global Chorus and Reverb - they sort of give you two extra things.
Someone did post here about using the Sub Output to route things back in and in theory you could send a sound out the Sub Out, then right back in to the input, and then assign an effect with the IFX - so it is actually possible to get 3 effects on any part you assign to Sub Out without using a "multi" type effect.
Finally, you can switch the IFX to be "in line" with each Part but it's going to be the same effect on all of your parts (not unlike TFX at that point).
So you can also get 3 effects that way.
TFX - adds that effect to ALL 16 sounding parts.
IFX - adds that effect either to the input signal coming in the jack, or, to all 16 sounding parts (one at a time).
MFX - adds that effect to an individual part.
On a single sound (1 part, or "single play mode") you generally have 2 effects - TFX and MFX, and the possibility of adding a 3rd, as IFX (in addition to the global Chorus and Reverb sends).
The better thing to do would be to send everything out the Sub output in mono, to a multi-effects pedalboard or rack unit, and then back into the FA via the inputs in stereo, and then on out the Main jacks (which is where the audio in would go out).
That way you'd have real effects you could actually control....