FA-06 / FA-07 / FA-08

Emergency! FA-06 stuck on Boot-up Screen

Emergency! FA-06 stuck on Boot-up Screen

11 Dec 2015, 00:05
I've only had my FA-06 for 2 weeks and as I was editing a song in the Mixer, everything stopped playing but it still allowed me to move around whatnot. I said, that's weird, so I powered down and powered it back up. Now it keeps hanging on the start screen. I've disconnected everything, turned it on and off several times at different intervals (five minutes, ten minutes, etc), and tried to hold down the Preview button to initiate the Expansion Slot Screen...I'm getting nothing. It's completely frozen. I'm currently leaving it on, in hopes that it will just fix itself.

it's under warranty obviously, but I'd rather not go through the headache of sending it back if you guys can help me out.

Thanks in advance,
Cam!

Re: Emergency! FA-06 stuck on Boot-up Screen

11 Dec 2015, 02:18
That's not great at all.

Sounds terminal to me - can't think of anything other than that you have already done. Something is failing big time somewhere and although inconvenient, it really has to go back for warranty repair/replacement.

Re: Emergency! FA-06 stuck on Boot-up Screen

11 Dec 2015, 06:20
Something wrong with the SD-card? Can you access the SD-card from a computer?

Re: Emergency! FA-06 stuck on Boot-up Screen

11 Dec 2015, 07:27
i think there is another button to set it factory settings on boot up... check the manual

Re: Emergency! FA-06 stuck on Boot-up Screen

11 Dec 2015, 12:48
mangepange wrote:
Something wrong with the SD-card? Can you access the SD-card from a computer?


I took the SD Card out and tried to run it that way. It DID start up after about an hour, but no audio would come through. I put the card back in to see if my samples would work and got nothing. So I turned it back off and powered it back up, again without the card...and nothing. Still hanging on the start screen

Re: Emergency! FA-06 stuck on Boot-up Screen

12 Dec 2015, 20:52
It's really unfortunate bro...... What's the current condition? What did you do?

Re: Emergency! FA-06 stuck on Boot-up Screen

13 Dec 2015, 15:14
kolporaj wrote:
It's really unfortunate bro...... What's the current condition? What did you do?
I called Roland and they told me to try and reinstall the firmware, but it won't even let me do that. So i called zzounds (the site I got it from) and they're going to send another one.

It's a bummer but, at least they're not giving me any crap about it.

Re: Emergency! FA-06 stuck on Boot-up Screen

14 Dec 2015, 05:42
phew! that's a relief. Glad everything worked out well :)
btw, how do you reinstall firmware? just like you do an update?

my version is 1.02. but I'm really afraid to do an update cauz where I live a power failure can happen any time. So I'm afraid it'll corrupt the firmware

And the worst thing is, where I live, there's no Roland service center. So if something happens I'm on my own :(

Re: Emergency! FA-06 stuck on Boot-up Screen

14 Dec 2015, 21:15
kolporaj wrote:
phew! that's a relief. Glad everything worked out well :)
btw, how do you reinstall firmware? just like you do an update?

my version is 1.02. but I'm really afraid to do an update cauz where I live a power failure can happen any time. So I'm afraid it'll corrupt the firmware

And the worst thing is, where I live, there's no Roland service center. So if something happens I'm on my own :(
Yes, it's just like doing an update. The manual specifically says don't try to re-install a version that you already have (in my case I would have put 1.03 back onto it) so I thought it was weird that they'd tell me to do it anyways. But as I said I couldn't even get to the update screen.

Yea, I understand not wanting to update under those conditions. From what I've read, I don't think there's a huge difference between .02 and .03, but I would suggest that you get an UPS (Uninterrupted Power Supply). It would act as a surge protector & power conditioner to give your board "clean" electricity, and since it has a battery inside it won't cut off if/when your power goes out .

Re: Emergency! FA-06 stuck on Boot-up Screen

16 Dec 2015, 00:40
Thanks for the suggestion :)

I'll get an UPS as soon as my exams are over. Then I'll do the update :)

Re: Emergency! FA-06 stuck on Boot-up Screen

18 Dec 2015, 16:49
Quick update guys. I sent it back Tuesday and got a brand new one today (Friday). Good news: Works great so far! Bad news: Unfortunately i wasn't able to back up my Studio Sets from the old fa-06. Good news: I worked with a finicky XP-60 for years, so I learned (after much frustration) to write down on paper every instrument i use in every song I record, track-by-track, part-by-part. So I'll be remaking my Studio Sets this weekend...and backing them up :)

Thanks all!

Re: Emergency! FA-06 stuck on Boot-up Screen

19 Dec 2015, 12:14
That's a really good habit Cam. Best of luck with your new board
I think i'll start writing down everything from now on :)

Re: Emergency! FA-06 stuck on Boot-up Screen

24 Jan 2016, 04:53
CAM! wrote:
Yes, it's just like doing an update. The manual specifically says don't try to re-install a version that you already have (in my case I would have put 1.03 back onto it) so I thought it was weird that they'd tell me to do it anyways.
The reason the manual says so, is because theres always a risk when you flash a BIOS chip, because it contains the basic program for operation, meaning if it screws up, your mainboard is dead. :-(

Process wise, its merely overwriting the existing data on the chip, replacing it with whatever your new image contains and hence it makes no difference if the existing image is the same as the one youre overwriting it with.

Good rule of thumb when it comes to updating BIOS' "if it aint broken, don't fix it" - If everything works for you, theres no need to take any chances by updating the BIOS. :-)

Re: Emergency! FA-06 stuck on Boot-up Screen

21 Jan 2020, 14:07
Today I got same problem please help me..

← Back to FA-06 / FA-07 / FA-08