Live setup with Fantom X6, controller and knob assignment.
10 Nov 2015, 11:31Hi everybody, I just purchased a mint condition Fantom X6 with ultimate piano and orchestral card for around 300 Euros. I am very happy with my purchase and have been scouting around this forum the last couple of days to get some inspiration. Endless possibilities it seems but also a bit of a learning curve here. I'm quite familiar with Roland keyboards having owned several through the years but could use some pointers in incorperating the X6 into my live setup.
My live rig for the last couple of years have consisted of a Juno G on 1st tier, XP 50 on 2nd tier, both fully expanded + Microkorg and Korg R3 on 3rd and 4th tier. I connect and mix them all into a small Behringer mixer that rests on the right side top of my XP50. I also put a stereo delay pedal (BOSS DD-5) between The XP50 and the mixer and its positioned on the left side on the XP opposite the mixer. The pedal is always on but with the effect turned down when i dont need it. This setup with the mixer and delay unit on my keyboard top gives me great flexibility when playing live because all the buttons and knobs are right there on top my keyboard. I can adjust the time, length and volume of my delay effect and quickly adjust the EQ and level of all my boards on the fly, which i find really useful, playing on a lot of different stages, working often with a house tech who doesnt nessesarily know the songs or sounds played.
What i want to do now is slightly different ;Using the X6 as soundsource and second tier board (for splits/organs & non-piano stuff) while using th SL Acuna 76 weighted controller for the X6 EP's and acoustic pianos. I'm a bit cautious about going down that road cause im afraid I will loose all the flexibility of my present setup. Here is what i pictured:
1. A setup on the X6 where i can choose 8 favorite patches for the Acuna on PAD 1-8, while using PAD 9-16 for some random samples. Then have the the splits and patches that i play on the X6 on the F1-F8 buttons
2. Recreate my BOSS DD-5 using the Realtime Control knobs to control a stereo delay assigned to part X. I really only need three control buttons: Level, Feedback, Time. If there is a way to do it "global" it would be nice so i wouldnt have to reprogram every patch to use the knobs for that specific purpose.
3. Run my Korg R3 and MicroKorg thru the Fantom and ditch my Behringer mixer, only using the Stereo out from the Fantom for all my boards.
Is it possible to do what i outlined here and is it worth doing in regards to functionability on stage where quick changes and flexibility is key? If someone could help point me in the right direction i would be very grateful :)
//Soundbvoi
My live rig for the last couple of years have consisted of a Juno G on 1st tier, XP 50 on 2nd tier, both fully expanded + Microkorg and Korg R3 on 3rd and 4th tier. I connect and mix them all into a small Behringer mixer that rests on the right side top of my XP50. I also put a stereo delay pedal (BOSS DD-5) between The XP50 and the mixer and its positioned on the left side on the XP opposite the mixer. The pedal is always on but with the effect turned down when i dont need it. This setup with the mixer and delay unit on my keyboard top gives me great flexibility when playing live because all the buttons and knobs are right there on top my keyboard. I can adjust the time, length and volume of my delay effect and quickly adjust the EQ and level of all my boards on the fly, which i find really useful, playing on a lot of different stages, working often with a house tech who doesnt nessesarily know the songs or sounds played.
What i want to do now is slightly different ;Using the X6 as soundsource and second tier board (for splits/organs & non-piano stuff) while using th SL Acuna 76 weighted controller for the X6 EP's and acoustic pianos. I'm a bit cautious about going down that road cause im afraid I will loose all the flexibility of my present setup. Here is what i pictured:
1. A setup on the X6 where i can choose 8 favorite patches for the Acuna on PAD 1-8, while using PAD 9-16 for some random samples. Then have the the splits and patches that i play on the X6 on the F1-F8 buttons
2. Recreate my BOSS DD-5 using the Realtime Control knobs to control a stereo delay assigned to part X. I really only need three control buttons: Level, Feedback, Time. If there is a way to do it "global" it would be nice so i wouldnt have to reprogram every patch to use the knobs for that specific purpose.
3. Run my Korg R3 and MicroKorg thru the Fantom and ditch my Behringer mixer, only using the Stereo out from the Fantom for all my boards.
Is it possible to do what i outlined here and is it worth doing in regards to functionability on stage where quick changes and flexibility is key? If someone could help point me in the right direction i would be very grateful :)
//Soundbvoi