FA-06 / FA-07 / FA-08

Layer different sound packages in one studio set??

Layer different sound packages in one studio set??

30 Apr 2015, 14:30
Is it possible to layer in one studio set different packages(!) of sounds??

Re: Layer different sound packages in one studio set??

1 May 2015, 02:36
Not sure I understand the question!

If you mean can you layer onboard sounds with EXP sounds then the answer is yes (limited to just the 2 EXPs at any one time).

Welcome to RC :)

Re: Layer different sound packages in one studio set??

1 May 2015, 07:47
Different to explain for me although it is a simple question, I will try to explain it differently... ;-)

I've created a studio set. In this studio set, there are different single sounds. After that I layered three sounds in the studio set. The result is a studio set with different single sounds and one layered sound.
Next, I would like to combine two of the remaining sounds to an additional sound layer. Unfortunately, it is not possible for me, in the same studio set to layer a second sound combination, which can be played independently of the first layered sound combination.

Is not it possible to use two(!) independent sound layers in one(!) Studio set?

By the way, thanks for the warm welcome.... ;-)

Re: Layer different sound packages in one studio set??

1 May 2015, 09:57
Welcome MacBad,

first of all, try to get through the manuals, and become familiar with the FA's nomenaclure. It is better for all to understand what you question is about.Is it sound, or part or tone etc.

In a Studio Set your are able to layer/stack, split and zone your PARTs as you like. For me it is not quite clear what you want to do. Let's say a layer is a stack of two parts. You can have two independent layer (this means i.e. four parts) side by side.
I you want to use two layers over the same key zone (or whole keyboard) you may want to switch between each layer. This could be done by setting each layer parts to one midi channel and work with midi control commands (i.e. expression with the switch keys S1/S2) or by switching the parts on/off via the pads.

Cheers, Benny

Re: Layer different sound packages in one studio set??

2 May 2015, 07:15
Yes, you're right. I will explain it better in a "FA's nomenaclure".. ;-)

In my studio set I have different PARTS. What I want to build is some multiple layered parts that I can play without hearing the other ones:

Example:

I have 16 parts in the studio set. Part 4 and part 5 are layered. If the Cursor goes to part 4 (or part 5) I can hear Part 4+5. Everything's o.k.
Next I want to layer Part 9 and 10, so I turn on "Keyboard Switch" on "Part View" for Part 9 and 10.
So the result is if the Cursor goes (for example) to Part 4, I hear Part 4+5+9+10 together. But I want to configure my Studio set that If the cursor goes to Part 4 I want to hear Part 4+5 (without 9+10) and if the Cursor goes to Part 9, I want to hear Part 9+10 (without 4+5).

How is it possible to configure that in the same studio set??

Re: Layer different sound packages in one studio set??

3 May 2015, 14:21
Grouping parts and select group of parts is not possible (don't know any other non-master keyboard with that feature at the moment).

Re: Layer different sound packages in one studio set??

4 May 2015, 13:35
hello there!

that's not possible with FA as far as i know.

An alternative would be setting the pads to part mute. Mute the parts that you don't want to hear(9&10), then (4&5) vice versa.

Re: Layer different sound packages in one studio set??

5 May 2015, 15:30
Okay, thanks for your replies & support!

That means for me if I use the sequencer for live playing (in order to play some samples and a click for the drummer) I only can use studio sets(!) for creating some complexer tunes / parts?? Well, then I will save them in a row to control it easily over a foot pedal. Not the ideal way for live playing in my opinion but don't know other comfortable solutions...

← Back to FA-06 / FA-07 / FA-08