FA-06 / FA-07 / FA-08

Volume on timbre in combi mode

Volume on timbre in combi mode

17 Feb 2015, 13:41
Working with Combi mode for bass split.

A) Is it possible to assign volume control for different timbres to different assignable knobs? Ex Bass 1, EP 2, Strings 3.... could I have volume for bass on Assignable 1 and volume Strings 3 on assignable knob 2?

If possible, how to you set that up???

Re: Volume on timbre in combi mode

17 Feb 2015, 13:55
PLEASE ignore this post. It is for the Korg Krome... Wrong forum... Sorry.

I know it is not possible on an FA 08

Re: Volume on timbre in combi mode

4 Mar 2015, 10:17
In fact it is possible with the FA. It is a bit of a workaround, but works quite fine. You can have two separate patches with individual volume controls on assignable knobs and additionally a third patch on top of them, the volume of which you cannot control separately (for example a piano, if you want to bring in some pads/strings with the knobs).

You can assign Assignable 1 to CC07 (volume) and Assignable 2 to CC11 (Expression). Then in part view, go to MIDI Rx Filter (the rightmost tab) and disable expression for the first part. For the second part, disable volume and for the third part disable both.

This way you can use Assignable 1 to fade in/out part 1 and Assignable 2 to fade in/out part 2. Part 3 will sound on top of these. This method should also work just fine with an expression pedal. You can do similar setup for all the parts, so you can layer as many sounds as you want for each of these three options.

Of course this will give you volume control for only two (groups of) sounds, I don't think it's possible to assign more with the FA.

← Back to FA-06 / FA-07 / FA-08