FA-06 / FA-07 / FA-08

What sounds and what does not.. (Studio set)

What sounds and what does not.. (Studio set)

23 Dec 2014, 16:14
Hello - my very first post and very close to Christmas we are.

Thing is I bought an FA-08 a couple of weeks ago, mainly for it's keys and it's low weight. It's a tad lighter than my A-80, and perfect for doing small gigs with the guys.

However - I think I might have stumbled over a design flaw/fault - and bare with me if I'm wrong.

What I like to do is this:
- Make a set of various sounds in Studio Set.. and then use the pads to switch them on and off during a song (while playing live).

This is no problem if you use MUTE, but that will result in a sound triggering when you hit the pad (if a keyboard key or several are being pressed).. - that would be normal in a live situation. So MUTE works, but it's not satisfactory.

However - if I set the pads to control the keyswitch.. that would work wouldn't it?? And it does!! It allows me to switch on and off sounds without the actual moment of hitting the pad affecting my playing - but the part chosen (the one with the red frame round it) - will also sound - no matter if the keyswitch is on or off. It cannot be turned off. Now that (!) I would call a design flaw/fault.

What do you think? Am I wrong here.. ? IMHO the whole idea with the key-switch should be allowing me to decide what sounds I play from a studio-set.

Re: What sounds and what does not.. (Studio set)

24 Dec 2014, 04:14
There shouldn't be any need to use mute - just create a studio set with the sounds you want to use for a particular song, then set the pad to 'part select' - the lights will turn green then you can use the pads to switch between sounds.

Re: What sounds and what does not.. (Studio set)

24 Dec 2014, 06:09
Hello eivind,
you should not use MUTE because muted parts will consume voices, regardless they are not routed to the output. Maybe you will run in polyphony trouble.
However - if I set the pads to control the keyswitch.. that would work wouldn't it?? And it does!! It allows me to switch on and off sounds without the actual moment of hitting the pad affecting my playing - but the part chosen (the one with the red frame round it) - will also sound - no matter if the keyswitch is on or off. It cannot be turned off.
Yes, this is not what we expect as user. But for the most cases here is my solution.
FA will save the current selected part (with the frame arround) with the studio set.
Unless you are not using all 16 parts, try to set the active part to an unused part (i.e. 15).
WRITE the set. After recall this unused part will stay selected.
You can now switch the parts on and off with the pads in pad mode KEYB SWITCH.
Do not use mode PART SELECT (or mute).

merry christmas,
bennyseven

Re: What sounds and what does not.. (Studio set)

25 Dec 2014, 18:55
Thanks bennyseven! That's a workaround that deffo will work.

@MJW - I'm aware of that possibility, but I need to layer sounds at all times.. i.e. have a piano at all times, bring in some pads here and there, and maybe double the piano with something when soloing. What I like to do is to have a studio set for each tune we're playing and then use the pads. The setup will vary according to the demands the guys put at me as being their "orchestra". :)


Enjoying this machine even more each day.

Happy Christmas from Norway to ya all. :)

← Back to FA-06 / FA-07 / FA-08