right forget what i wrote previously,i was reading somewhere that you cannot sync the juno g's arpeggio to external software so that is why i just posted what i did,turns out the chap who said you couldn't was talking complete drivel.
so here is how to do it.
1) with performance lit only press menu once.
2) press down arrow once.
3) press enter once.
4) press orch button once.
5) turn wheel anti clockwise,this turns local off then press write.
6) press exit once.
7)press world button once
8) press guitar button once
9) press the dec button a couple of times,then press inc button once this will set slave-midi 10) press down arrow once and press the inc button a couple of times.
11) press down arrow once again and press the inc button a couple of times.
12) press down arrow once more and press the dec button a couple of times just to make sure it moves to where you want it.
13) press write.
that's it.
the next part is to set up your sequencer software so it will start recording and while you hold a key on the juno g with the arpeggio on,at this point you should not hear the juno's sound, then your software will start recording and it will record the juno g's notes once it start's the recording process you should hear the juno's sound and because the juno g arpegiator is now synced to it's self it will be synced to the software's tempo as will the speed of the arpeggio's.
i use cubase vst 24 on windows 98,and this is how i have set it up to record the juno's arpegiator.
MASTER off on the inspector player,AQ on, CLICK on,SYNC off.
in options i setup the synchronization page as follows.
sync source-intern
from input 1 roland um 1 midi
output-1 roland um 1 midi
25 frp-frame rate
midi clock-tempo base
from input- 1 roland um 1 midi midi time code 1 roland um 1 midi.
midi clock-1 roland um 1 midi.
if you have similar software you should be able to set it up o.k.
good luck,let us know how you get on.
paul.