JUPITER-50

More newb questions

More newb questions

10 Oct 2013, 12:17
Hi. OK, back to the much-maligned but perfectly wondrous beast (I'm putting together a small but powerful studio and learning it all individually and at once after a long break from recording, so I can't plunge entirely into the JP50, seductive as it is).

I have figured out how to use the JP50 as a master keyboard controller -- which a longish thread in the JP80 forum attempts to tell us it's useless at. I think he meant to say it's not the deepest MIDI controller keyboard out there, but somehow or other I am controlling virtual instruments with it just fine. I guess miracles happen.

In other words, by placing a "check" on MIDI channel one and turning the onboard volume down, I can play, hear, and record virtual instruments in my DAW, Studio One, just fine.

But now I want to record (MIDI, not analog, I know how to do that) the Jupiter itself. Is there an easy way to do that (the manual might have this information, but it's disguised as something else)? Let's not even go into how to do program changes yet. Let's just say for now I'd manually call up the correct Jupiter sound. So how do I get Studio One (or any DAW, for that matter) to show input activity and record the track?

Also, an easy one: what size USB memory stick do you recommend and which brand?

Thanks again!

Oh, bonus question: anyone found a keyboard cover that fits a 50 well?

Re: More newb questions

10 Oct 2013, 17:12
That's the basic idea but that particular one is not too easy to obtain in the USA -- I guess being World Policeman doesn't get you everything. Maybe a drone plane could be redirected to drop one off here in Colorado, lol.

Actually I think I have the keyboard cover taken care of.

What about the bigger question about recording the Jupiter's own sounds into a DAW? And the USB stick?

Thanks for trying.

Re: More newb questions

11 Oct 2013, 15:46
I've got a JU80+synths, multiport midi interface and audio interface with zero latency mixer. The Jupiter is the master keyboard. Running Logic 8. I'll use Logic terms. First thing, turn Jupiter Local Off and sync mode to slave. When you create a external midi track, go into the properties inspector and set it for the Jupiter channel you want to use (I've setup my JU80 livesets & tones in Logic's enviroment so I select this in the library). With the track selected and record enabled as you play the keyboard you should be hearing just that midi channel. Now you can create new tracks with different midi assignments for the other 2 parts.

If you are playing an entire registration you need to have identical midi data in all 3 tracks. What I do is view the Jupiter like any other multi timbral synth. I use registrations to control the multi timbral aspect and always have different tracks playing their respective parts.

I would recommend when recording midi data have only one Jupiter part selected. This is really important. In Logic, having multiple parts selected while recording midi results in duplicate notes in the track - this eats your poly and skews the sound. I suppose the registration is sending note data for all 4 parts (3 in your case) on different channels. The track setup doesn't know the difference and records 4 notes (assuming all parts are selected) for every key press.

Once you have midi tracks for all the parts, create 3 audio tracks. Mute 2 of the tracks, record each one individually. At this stage I turn off Jupiter reverb and add it back at mix time.

You can use any USB stick, any capacity. I pickup 1Gb freebies at tradeshows that work perfectly. They might not be totally reliable, but its easy enough to backup to hard drives.

Re: More newb questions

11 Oct 2013, 17:12
Thanks for all that. I'll report back once I plunge in.

The mere fact you're using a Jupiter as a master controller with a MIDI interface gives me hope it'll do just fine for the beginner to intermediate MIDI recording I need to do (usually just adding a few sound textures to singer-songwriter pop rock stuff).

I don't even have another keyboard or a MIDI interface, so things should be simpler for me once I wrap my head around the master keyboard implementation.

If I need to worry about advanced orchestration or I go into EDM, I'd consider using something else as a master keyboard ... but the Jupiter should be fine for the big project I'm undertaking now. It continues to impress me.

Re: More newb questions

12 Oct 2013, 13:39
Devnor -- basic functionality achieved thanks to your instructions for Logic for which I found equivalents in Studio One (no Logic on the Windows side, but I'm digging S1 so far).

I have been able to record the onboard Jupiter sounds and use the Jupiter to control/record virtual instruments. Both play back correctly.

Next up: figuring out the channel assignments and program changes.

Do you pretty much leave Local Off and Slave On all the time -- or do you switch those around depending on what you're doing?

Also, is the Jupiter's limitation that you can only record three parts (excuse me, I'm still getting the terminology down) at once, the ones you say you record on separate MIDI channels for greater control? That would definitely bother me if I was all MIDI all the time, but it's not a deal breaker for the main project I'm working on which uses a lot of audio like guitars and vocals.

Re: More newb questions

12 Oct 2013, 17:12
Troggg -

The Jupiter-50 can only play three different sounds simultaneously - these are the Lower, Upper, and Solo parts. They can be assigned to different MIDI channels when working with an external sequencer.

You can obviously record a zillion Jupiter-50 parts to audio. Either play the part "live" into Logic, or record a sequenced part.

Michael

Re: More newb questions

12 Oct 2013, 17:21
Troggg -
Do you pretty much leave Local Off and Slave On all the time -- or do you switch those around depending on what you're doing?
The way I work, with my computer and Digital Performer, LOCAL is always OFF, as I am always recording MIDI data into the sequencer. This allows me to fix timing problems, or even change notes before I record the synth part to audio.

If I were to use my computer just like a tape deck, however, and simply play the keyboard into it and record what I am playing, I would probably have LOCAL ON, and have it such that I was monitoring my keyboard "live" and not subject to any latency or delay while it was running into the computer and being recorded. But I actually never do this, so I can't be sure. :)

Michael

Re: More newb questions

12 Oct 2013, 19:50
Well I guess that 3-part limitation was a fair criticism when the 50 was a $2000 USD machine.

I can look at that one of two ways:

1) The Jupiter is severely limited in its MIDI spec.

2) It'll keep me from over-orchestrating singer songwriter and pop rock productions -- which is probably a good thing. I wanted to add some compelling textures to mostly guitar productions. So this particular limitation may actually be a good thing!

Thanks for everyone's help!

Lory aka troggg

Re: More newb questions

14 Oct 2013, 10:04
Viewing the 50 as a three-part machine is even more of a stretch when you consider that the Lower and Solo parts don't get their own effects. You can, for example, control the amount of reverb applied to the Lower and Solo parts, BUT the reverb type can only be the same one that is used for the Upper Live Set. And, of course, the Lower and Solo parts can only be individual Tones. This has probably been mentioned already.

All this being said, the Jupiter-50 works great for someone like me who plays a lot of left-hand bass. It is easy to set up a keyboard split and have a synth or electric bass sound on the lower end of the keyboard, and I don't typically apply much (if any) reverb or effects to bass parts anyway. You can then switch between various Live Sets for the right-hand part. You can split the keyboard again and put a basic solo sound on the upper part of the keyboard.... These can be relatively uncomplicated lead sounds, muted trumpets, a violin... any number of different things. The major limitation, again, is that (as far as I know) you can control the reverb amount for the Solo part, but not the reverb type - this is taken from whatever Live Set you have dialed up.

Because I have several other 16-part multitimbral hardware synths, along with bunches of software instruments, I don't anticipate using the J-50 in three-part mode when sequencing anyway. More than anything, I enjoy just PLAYING the J-50, setting up a keyboard bass sound and playing around with various Live Sets while having drum loops playing on my MOX.

Re: More newb questions

14 Oct 2013, 14:40
"Viewing the 50 as a three-part machine is even more of a stretch when you consider that the Lower and Solo parts don't get their own effects."

---From poking around various videos I now know that the Jupiter 80 has separate effects for upper, lower, and solo. Once again, that still doesn't bother me, because I don't do my final mixes. All I have to do is get in the ballpark. I must be the dream customer for the 50, which is strange when you stop to consider I didn't even know it existed until that fateful day I was cruising controllers at Guitar Center ...

"You can, for example, control the amount of reverb applied to the Lower and Solo parts, BUT the reverb type can only be the same one that is used for the Upper Live Set. And, of course, the Lower and Solo parts can only be individual Tones. This has probably been mentioned already."

---Still no problemo. Get it close, then let someone born to tweak EQ, compression and reverb/delay do their thing.

"All this being said, the Jupiter-50 works great for someone like me who plays a lot of left-hand bass. It is easy to set up a keyboard split and have a synth or electric bass sound on the lower end of the keyboard, and I don't typically apply much (if any) reverb or effects to bass parts anyway. You can then switch between various Live Sets for the right-hand part."

---I put in a lot of time this weekend attempting to wrap my head around the lingo. I'm making slow progress but progress. Biggest confusion is difference between Live Sets and Registrations. For someone like me who isn't going to be playing live for a while, I wonder how I should approach live sets? I'm missing what these can do for me if I'm not following a set list for a live performance. How can Live Sets make my creative life better in a way Registrations can't???

---I also noticed the 80 has way more live sets ... they already seemed like a lot to handle in the 50!

"You can split the keyboard again and put a basic solo sound on the upper part of the keyboard.... These can be relatively uncomplicated lead sounds, muted trumpets, a violin... any number of different things. The major limitation, again, is that (as far as I know) you can control the reverb amount for the Solo part, but not the reverb type - this is taken from whatever Live Set you have dialed up."

---That would be a limitation if I don't have my DAW's reverbs at my disposal. Since I do ... c'est la vie.

"Because I have several other 16-part multitimbral hardware synths, along with bunches of software instruments, I don't anticipate using the J-50 in three-part mode when sequencing anyway. More than anything, I enjoy just PLAYING the J-50, setting up a keyboard bass sound and playing around with various Live Sets while having drum loops playing on my MOX."

---One of the great things about the Jupiters as you and others have mentioned is that the dang thing sounds great even when you're just learning your way around it experimenting.

---I can already see that it's worth it to persevere learning my way around the board. While I wouldn't say it's completely intuitive, it's not so unusual that you can't find what you need. I imagine there's so much power under the hood there's no easy way to present it all ... but that's OK. I try to enjoy the journey not just the destination.

Re: More newb questions

14 Oct 2013, 22:36
Trogg -
---I put in a lot of time this weekend attempting to wrap my head around the lingo. I'm making slow progress but progress. Biggest confusion is difference between Live Sets and Registrations. For someone like me who isn't going to be playing live for a while, I wonder how I should approach live sets? I'm missing what these can do for me if I'm not following a set list for a live performance. How can Live Sets make my creative life better in a way Registrations can't???
- The basic element is a Partial.

- Tones are comprised of up to three Partials.

- Live Sets are comprised of up to four Tones. This is where you get most of your bigger, layered sounds.

- A Registration can be (up to) a Lower Tone, an Upper Live Set, and a Solo Tone, all at the same time. These sounds can either be split to different parts of the keyboard, or layered on top of one another.

Keep in mind the "up to" aspect of these settings. For example, a Registration could simply be comprised of a single piano Tone, situated in the Solo section, and spread across the entire keyboard.

Or, a registration could be a synth bass tone in the Lower, a Live Set containing four tones (synth brass, strings, choir, and piano), and a violin tone in the Solo section. So with the J-50, a Registration could have up to six tones (with three partials each) spread anywhere on the keyboard.

The Jupiter-80 gives you TWO live sets simultaneously, along with a lower tone and a solo tone.

Hope this helps (and I hope I've got it right!)...

Michael

Re: More newb questions

15 Oct 2013, 11:38
troggg wrote:
I hate to ask what a "layer" is, lol.
A layer is like having several keyboards on top of each other (layers) and you are able to play a different part or tone on each one allowing them to sound at the same time. That is layering!

The layering on the JP-50 can be massive, like Keyboadwizard mentioned before.
Make Music and be Happy !!
PauloF

Re: More newb questions

15 Oct 2013, 17:12
Layering, for example, could involve playing a chord on the J-50, and having it play the sound of a piano and a string orchestra at the same time. And then, maybe while you hold down the keys, the sound of a choir comes in, "singing" the same notes as the chord.

You can do all kinds of really neat things with "layers." Combine flutes, oboes, bassoons, and clarinets, and you'll mock up a wind orchestra. Create a whole brass section by playing trumpet, trombone, and saxophone sounds all at the same time.

Choose four different types of bell sounds, and pan them across the stereo field.

Combine low strings, baritone horns, and timpani.

The possibilities are endless! :)

Michael

← Back to JUPITER-50