Guitar on Jupiter 80

ok i will teach everyone how to make a killer guitar sound and when i am done you will be making your own....but, this will take several post and a couple of days

PLEASE ALLOW ME TO FINISH SO IT WILL ALL BE TOGETHER AND THEN YOU CAN ASK QUESTION THANKS

i will be using version 2.0 so upgrade if you need to

part 1 Initializing a Registration

turn on the jupiter 80 and you will get this screen
[attachment: 1.JPG] in the upper right press single, you will get this screen

[attachment: 2.JPG] press the upper most edit, area you will get this screen

[attachment: 3.JPG] at the top, press utility, you will get this screen

[attachment: 4.JPG] press select, then ok and then the exit button once (not on the screen, under the dial)
your screen should look something like this

[attachment: 6.JPG]
you now have Initialized a Registration ....

part 2 initialize a live set

do part 1
[attachment: 6.JPG] next to Jupiter Brass 1 press edit, your screen should look like this

[attachment: 7.JPG] press utility at the top, your screen should look like this

[attachment: 8.JPG] then press Select and ok, your screen should look like this

[attachment: 10.JPG] now your ready to make a new guitar sound
part 3 setting up the guitar sound coming tomorrow

Thank you so much!

part 3 setting up guitar sound

do part 1 and 2, then you will this screen

[attachment: 1.jpg] then press edit on part one then you should see this screen

[attachment: 2.jpg] then press synth edit, you should see this screen

[attachment: 3.jpg] leave all setting to default except
WAVE
press wave till your have pcm lights up. press right on the number 45 and use the dial till you get to number 199
FILTER
i run my guitar thru the filter to add life to it,
cuttoff -100, key follow - 40, evn dept - (minus)-35
a - 127, d - 105, s - 0, r-127
AMP
r - 40, velo sens - 5
then your screen should look like this
[attachment: 5.jpg] this is the sound of the guitar body
we still have a ways to go (like add Distortion)
next part Saving this sound

@fantomCK

Great that you're spending this effort to answer the OP - impressive!

Good too that you're guiding through the creative process - much better than a file or a youtube vid, I think.

part 4 Saving the guitar sound

do part 1,2 and 3
then you should have a screen that looks like this [attachment: 1.jpg] at the top press tone write and you should get this screen [attachment: 2.jpg] press the bottom space that has words in blue and then scroll down to the lowest numbered space that says init synth and press select [attachment: 3.jpg] then press rename and name your tone and press ok [attachment: 4.jpg] then press the write button and your tone is saved

coming soon part 5 guitar mute (we are getting there, few more parts)

You are very nice to do this and help people to make nice sounds.
Thankyou

making a mute guitar sound
this we will make from scratch, so start over doing part 1 and 2

you should have a screen like this
press part one edit [attachment: 1.jpg] then press synth edit [attachment: 2.jpg] leave all setting to default except
wave -pcm 204
AMP
d - 40
s - 0
r - 20
velo sens - 0
you should have a screen like this [attachment: 3.jpg] then at the top press tone write
press the init synth and scroll to lowest number that says init synth
click on rename and name the tone


then press write and ok

you now have a muted guitar sound

next part we will learn how to make the mute sound when played soft and the body when played loud
via velo switching

ok bare with me
at this point you should have what i call a guitar body tone and a guitar mute tone saved on your j80
once again do part 1 and 2

should have a screen like this [attachment: 1.jpg] in part one double click right on init synth
at the bottom press superNaturalSynth till orange
on the left scroll to no assign
on the right find your guitar body [attachment: 2.jpg] press select

then press number 2 till red
in part two double click right on concert grand
at the bottom press superNaturalSynth till orange
on the left scroll to no assign
on the right find your guitar mute
press select
should have a screen like this [attachment: 3.jpg] now to set the switching
press layer in blue near the top
velocity on the left
in part one set veloLower tp 100
in part two set veloUpper to 99
should have a screen like this [attachment: 4.jpg] press the exit button once (under the dial)
now play the keys
when play soft you should hear the mute when hard the body
now lets save

press live set write at the top [attachment: 5.jpg] press the text in blue
scroll up till you find a init live set place
rename and write


we are so close
next part is add distortion, delay, and reverb

Great :-)

Thanks for taking the time to do this !
Awsome tutorial FantomCK

Mods, can you make this one sticky please?

Cheers,
PauloF

Your wish is my command, PauloF! =)

piaknowguy wrote:

Your wish is my command, PauloF! =)

Thank you Sir!
;-€

This is a fantastic tutorial. Many thanks for it.

I'm sure many of us are keen to know the effect settings. Will they be published soon?