V-Synth

V-synth v2 question zones and projects.

V-synth v2 question zones and projects.

22 Sep 2011, 02:34
I have just bought a v-synth and after read the owner manual, I have some doubts and I must be doing something wrong. I am sorry because they must be vey basic questions, anyway your help will be appreciated.

Question 1. Zones a drum patchs. : I want to work multipart with logic sequencer, If I use the rhytm mode, it is assigned automatically to part 1, this means that I can´t use the arpegiator for another synth parts, because it only works on part 1. In order not to lose the arpegiator function and use internal drum sounds, I decided to make a new patch with different zones, that´s way I can have a set of 16 sound drum kit patch. I t will be assigned to part 10 in the sequencer. The question is, when I create a multizone patch, Which way it works?

Alternatives 1:
Use previously created patches, so that I call patch for example number 500 which contain a bass drum, patch 501 which contain the snare sounds …

Alternative 2
or in the other way, can I created a new completely patch which the different oscillators, this means, when I use zone 1 and then I assigned a bass drums pcm+oscilator, when I change to zone 2 and I choose another pcm for snare, and so on. Then I save the patch and I got a new patch with different 16 drum sound? Without calling existing patches.

¿what is the real operating mode?

Another question related to zones, ¿what happen with the pitch? If I assign zone 1 for example C2 to G3, the original pitch goes to directly to C2 note, ¿it is true?

Question 2 Saving and creating new projects.

What is the correct mode of operating with projects? I want to create a project with the my favorite patchs of version 1.5 an 2. How can I do that? If I want to create a new project, if must be a empty project? A copy of a existing project?

Question 3. Importing patches.

If I want to copy a patch which contains a wave-pcm. If I copy the patch, am I copying the wave associated?

Question 4. Tempo synchro.

Loop tempo synchro. If I import a drum loop 120 bpm and I want to use it in a song with tempo 115 bpm, How can I syncro the tempo, I suppose that I have to enter the original tempo (120) and activate a syncro function to change it to 115 bpm.

The same question with vocal samples, instead tempo pitch, If I import a vocal sample, What is the assignation of the original pitch?

Question 5. Project size, in internal memory I can use maximum 50 mb, when I use a CF card of 1 GB, Is the maximum size of the project of 50 Mb again or can I be expanded?

thank you in advance.

Re: V-synth v2 question zones and projects.

27 Sep 2011, 04:53
Ok, I will answer to myself questions I have just discovered, i understand some of these question are very basic.

Question 1. It is not necessary to recall existing patches when you work in zones. You can create a new patch with different sounds.

Question 2 and 3. software librarian do the job.

Question 4. Pitch y tempo. Pitch original : in sample info window you can indicate this note, by default always c4. Tempo it is not clear for my either. There is a window with original tempo, but i do not know it is necessary to syncro the track tempo.

Question 5. 50 mb is the limit, because you load from the card to internal memory, you do not work directly with card memory.


Another questions, even i do not expect anyone help me.

I want to use v-synth v2 with (not gt) in a logic daw as master keyboard of another synth jp8080 and virus, and i want to work v-synth multitimbral (not more than 3 parts because of poliphony). I know how to configure different patch and different channel in patch info windows and sytem midi receive channel window. But i don not know exacty how play virus and hear at the same time previous track recorded in v-synth. I always hear the v-synth part 1 patch plus virus.

¿Where can i exchange V-synth patches?

regards.

Re: V-synth v2 question zones and projects.

29 Sep 2011, 16:03
Hi there :)
Sorry for not answering, there is a reason for it.
(at least my reason)
a) you posted a lot of questions, and my attention span is a little short :)
b) the zoning problem is something most of us don't understand either :)
c) what was the question again?

We're here and we're answering whenever we can. The Roland clan is a very nice and strong crowd. Welcome to it :)
Anyway, to your logic / Virus question:
It is a little hard to judge your problems from here, not knowing your exact setup. Do you have a multi- port midi interface (like the motu micro lite) or a single-port, 16 channel interface? Anyway, it sounds like you should switch off local control in your v-Synth. This way, you can play notes -> they are bypassed from the v-synth sound engine -> Logic -> Midi out -> back into the v-synth again (or Virus) -> BLING :)
Additionally, you would have to select the Virus midi track in Logic if you want to send midi data there. If the virus tracks and the v-synth tracks have different midi channels, this should work. (there IS of course a way to totally personally configure every thinkable midi routing in Logic, but that exceeds my competence and is note for the faint-hearted. hehe. )
I hope this helps you a little! And don't hesitate to ask, it might take a while (weeks sometimes), but you will probably get an answer :)

Cheers,
Barely.

Re: V-synth v2 question zones and projects.

2 Oct 2011, 03:12
Thank you for answer, it is clear now, the keyboard switch off was the problem,I made too many questions and most of them were very simple.


Only one thing, if i import a drumloop originally recorded at 100 bpm, and i am now working in logic in a track with 130 bpm, should i "tell" to v-synth or it is adjusted automatically?


Thanks

Re: V-synth v2 question zones and projects.

2 Oct 2011, 03:15
Sorry, i mean i should "tell" to v-synth the original tempo the Loop was recorded

Re: V-synth v2 question zones and projects.

2 Oct 2011, 06:53
Hi there, glad to hear it worked :)
about your beat synchro question:

again, this is not answered that easily ;)
short answer: set V-Synth clock to sync to external:
mode-button -> system -> Midi USB -> clock source to external.
Do not forget to set this back to internal, or your arps (among others) won't play unless the v-synth gets a time signal.

Now, if you have a drum loop as a .wav, you need to load it into the v-synth and then encode it with the right settings.
The easiest way to understand what that means would be to read the manual, sampling section. English language version page 103-120. Page 117 tells you a bit about the original tempo setttings. Experiement a bit. This is essential. (I propose using the "backing" encoding for loops). You can then do a LOT with your drum loop, even slice it up and play a totally different loop with the sounds from the loop. This is one of the main features of the v-synth and takes a little practicing to get used to. As I am still in that practicing phase, I can't tell you much more :)
Maybe one of the other readers here *cough cough* can shed a little more light on the issue?
Good luck!

Re: V-synth v2 question zones and projects.

2 Oct 2011, 07:20
thank you

another question, the wav i import sound not as well as the internal memory one, even they are no low resolution. Why internal roland pcm sound than my high quality imported wav sound? Not processed, it is possible get new roland native pcm sounds? it sounds quite better than anything i put inside v-synth (before processing of course)


about variphare capabilities, v-synth versus varios, Is the same variprase machine?

Re: V-synth v2 question zones and projects.

2 Oct 2011, 08:50
fcgime wrote:
thank you

another question, the wav i import sound not as well as the internal memory one, even they are no low resolution. Why internal roland pcm sound than my high quality imported wav sound? Not processed, it is possible get new roland native pcm sounds? it sounds quite better than anything i put inside v-synth (before processing of course)


about variphare capabilities, v-synth versus varios, Is the same variprase machine?
Well, Roland is very good at making great sounds :)

You might try to process your samples (EQ, compressing if you need to) before you shove them into your v-synth. There are a lot of factors that interfere with the quality - starting at microphones and preamps, if you sample acoustic instruments. The question is, what do you mean with "better"? :) The answer to that problem can fill a whole career at the SAE :)

Oh and V-synth and VariOs, they are essentially the same engines, only the v-synth is newer. Old VariOs machines are great, but have the problem that they NEED the software, and this is not upgraded (no osX SnowLeopartd/ Windows 7 version, as far as I know).

Re: V-synth v2 question zones and projects.

3 Oct 2011, 02:30
Thanks for your answer, let me explain,
I use 44,1 Khz-16 bit wav samples from professional instrument libraries, not self-made samples. Native Roland samples should be made in a lowest resolution because 32 mb are used in 255 pcm waves, and my samples are stereo (Roland native samples are monoaural) and use 2 mb for each sound. Roland native samples sounds louder and better defined over any wave I load inside the V-synth. Roland original patches are not multisamples. For me, Roland native samples must have an special treatment or internally processed. V-synth has a great quality internal pcms but not too much. 255 and 150 of these are percussion pcms. The V-synth patches are very effective and can fill the track, and when you use one patch in one track, you must not use this patch again in other track, because they can sound quite similar. That is the reason I want to built my own patches or buy or exchange new patches.
I use vocal samples in my tracks regularly, it has been a hard work to match the vocal sample tempo and pitch with the track with melodyne or autotune tools. Variprhase made a great job, you use robot voice parameter and eliminates the original melody from of the vocal sample, it can be used now for every tune (thanks Jim Stout video tutorial) but in this process, V-synths transforms the voice sample in something robotic. Sometime I like the results in other not, then I go back to melodyne and tune the vocal sample more natural, I suppose V-producer will this job as well as melodyne or autotune but I suppose that v-producer is no longer available and Roland is not going to work in this areas. It will be very helpful use v-producer to arrange samples in a V-synth enviroment, I suppose it does not exist any software but it is normal arrange the vocal samples and it is a hard work if you do not have tools.
For me V-synth are 3 machines which combination made it fantastic, in one side a powerful VA, a small rompler and a variphrase sampler. For my particular desire, I would like get new “native” roland pcm and V-producer software. ¿Can I load internal pcm from V-synth GT? ¿It is the same format?
Thank in advance.

Re: V-synth v2 question zones and projects.

3 Oct 2011, 04:24
Interesting usage, I never really used vocal samples (except some strange gargling noises).
Maybe you just need some compressor and a little EQ? If the native PCMs sound more "defined", I can imagine they have been compressed, so that they sound louder. You don't need roland software for that. Why don't you load your sounds (wavs) into Logic and treat them (very cautiosly!) with an EQ and Compressor in the channel strip, then export them and load them into the v-synth?
That said, Melodyne is probably the best tool to tune and pitch vocals, however, there's always a limit (speed or pitch) after which it begins to sound not so good. You can still try to experiment with the "formant" knob/parameter on the v-synth, but with every soft- and hardware, there a boundaries in which a sound still sounds natural.
Good luck!

← Back to V-Synth