Fantom-G

a new count down is started, maybe is it the right time !?

Re: a new count down is started, maybe is it the right time

14 Sep 2011, 14:28
Jan_nl wrote:
Has anyone seen this paper from Roland?

Now we have. Thanks, Jan_nl!

Re: a new count down is started, maybe is it the right time

14 Sep 2011, 14:39
For what ever reason, Roland is inundating me with Jupiter-80 email.

I've no interest in the board for a number of reasons (one being the weight) but my primary reason is the handling of the FG series. I looked high and low for a place to e-mail reply as I wanted them to receive my 2-angry-cents on the issue, but they were smart enough not to have a quick e-mail link.

I could live with no other updates than a data backup / transfer fix, but admit that knowing the JP-80 engine is ARX based, bugs me to no end. We've been kicked to the curb!

Tommie

Re: a new count down is started, maybe is it the right time

14 Sep 2011, 19:10
Well there you have it countdown 00 00 00
Game Over...

Just a whole lot of what is already out there
and......
as expected.. Nothing for the G..

so now its time to move on....

and stop wasting any more time with roland..



[img]http://www.geocities.com/cpmul/myconfig.jpg[/img] - [img]http://forums.rolandclan.info/pub/attach/116700-UT.jpg[/img] - [img]http://www.geocities.com/cpmul/filesystem.jpg[/img]






Listen to GlassSlipper


X-Bugs.org

Results not Excuses

My Setup

Re: a new count down is started, maybe is it the right time

14 Sep 2011, 19:22
so what was on the site? I can't get it pulled up on my phone.
Can You Touch The Apex

Re: a new count down is started, maybe is it the right time

14 Sep 2011, 19:24
You got Namm 2012 when they come out with the ARX Drums II card and FG OS update that adds IPAD support !!

How about some Namm 2012 Roland Micro Monitors or Roland Drum Sticks to go with that new Sampling Pad that just came out minutes ago?

Don't give up Roland might have lost its vision rehashing old products but after they find out people will stop spending they regain their senses in the synth categories.

Re: a new count down is started, maybe is it the right time

14 Sep 2011, 19:33
Its already too late..
Game over..



[img]http://www.geocities.com/cpmul/myconfig.jpg[/img] - [img]http://forums.rolandclan.info/pub/attach/116700-UT.jpg[/img] - [img]http://www.geocities.com/cpmul/filesystem.jpg[/img]






Listen to GlassSlipper


X-Bugs.org

Results not Excuses

My Setup

Re: a new count down is started, maybe is it the right time

14 Sep 2011, 21:49
The worst countdown ever! Yuck and double Yuck...

Oh well, my G still works well for the live sets I do...Piano, Piano with strings, EP, Pads, etc.

I wonder if I should finally sell my X7 and the SRX cards since it has been sitting as a backup for 2 years now. I could then afford the new Komplete and the New Samplitude update and more...

hmmm....I think I may...
www.songsforthemaster.com

Re: a new count down is started, maybe is it the right time

14 Sep 2011, 22:16
yeah me too.. on the x6
I sometimes contemplate keeping the X and selling the G since i can achieve the same sound in the studio with either..
then i think again.. and favor the G.. :)



[img]http://www.geocities.com/cpmul/myconfig.jpg[/img] - [img]http://forums.rolandclan.info/pub/attach/116700-UT.jpg[/img] - [img]http://www.geocities.com/cpmul/filesystem.jpg[/img]






Listen to GlassSlipper


X-Bugs.org

Results not Excuses

My Setup

Re: a new count down is started, maybe is it the right time

14 Sep 2011, 23:32
madAhorn wrote:
The worst countdown ever! Yuck and double Yuck...

Oh well, my G still works well for the live sets I do...Piano, Piano with strings, EP, Pads, etc.

I wonder if I should finally sell my X7 and the SRX cards since it has been sitting as a backup for 2 years now. I could then afford the new Komplete and the New Samplitude update and more...

hmmm....I think I may...
which SRX cards do you have horn? and list prices for them as well. thanks.
Can You Touch The Apex

Re: a new count down is started, maybe is it the right time

15 Sep 2011, 10:53
I share everyone's frustration. When I gazed at the products listed on the countdown site there was an immediate letdown since obviously nothing for the Fantom G was included. Plus no Fantom G successor which I was honestly hoping for.

In the Roland .pdf linked in this thread talking about SuperNatural and Behavior Modeling technology the Sumary concludes with:

"These complementary technologies are fully realized throughout the JUPITER-80 live performance 'synth' and form the bedrock for many Roland products in the future."

The Jupiter-80 'synth' just came out so I can understand Roland's decision to hold off releasing a full blown Flagship Workstation keyboard anytime soon. On the other hand, perhaps the Jupiter-80 is Roland's new "template" for what they now consider a "workstation" keyboard should be? Perhaps every Flagship keyboard product Roland releases in the future won't include a Sampler or a Sequencer or Expansion capability? The new "template" might be centered around the Jupiter-80 concept indefinitely i.e. NO Sampler, NO Sequencer, NO expansion capability. That way Roland can keep producing dumbed downed products, lowering their cost, while at the same time keep charging an arm & leg for them like the Jupiter-80? :D

You gotta hand it to Roland. They took away many "key" professional features from the Jupiter-80 (while adding SuperNatural exclusivity plus Behavior Modeling - big whoop), essentially dumbing down what is considered a flagship product i.e. the Jupiter-80 has NO Sampler, NO Sequencer, NO Expansion capability but at the same time Roland RAISED the price, hoping people wouldn't notice?? And still buy it? :(

You have to admit the Jupiter-80 is kind of a dumbed down workstation in my opinion. They call it a synth but it has a full range of acoustic instruments so in reality it's similar to the Fantom G workstation - only NO Sampler, NO Sequencer and NO Expansion capability like the Fantom G has.

I hope Roland doesn't mind multitudes of their customers jumping ship, meeting their keyboard needs at other keyboard companies like Yamaha, Korg, Kurzweil, Casio, etc., etc., after realizing Roland gave their customers "the shaft" by dumbing down their flagship product(s), while at the same time charging even more for them? :( Where is the fairness in that? Hmmm??

Sorry guys. I'm upset and my words reflect some of that frustration. To which I apologize... but don't regret. ;) If it helps knock some sense into Roland's "bottom line" shenanigans then it will be worth it. :)

Re: a new count down is started, maybe is it the right time

15 Sep 2011, 12:09
First, I'd say that it is more than crystal clear that there will be no updates to the FG. It is as it is and that's it.
Second, it's also crystal clear that so soon after the release of the JP80, nobody can really expect a new workstation based on the same technology. The jp80 is at $3500 list price. The same as the competition charges for their 76key workstations. What would Roland has to ask for a SN workstation with 76 keys if the jp80 alone costs that much.
And finally, Roland could really abandon the workstation concept at all and focus on other keyboards. They IMHO never were really successful making workstations. They always tried a new way, a new concept and always failed by making the most simple things wrong. They could really stay focused on (performance) keyboards. It wouldn't be the first time. In the nineties there was the JV line, before that the U20 and D70 and none of them was a workstation.
I think that the jp80 is a terrific keyboard for those who don't need sounds beyond what the keyboard offers out from factory. For the rest, it's a great but expensive second keyboard on the stand.

Re: a new count down is started, maybe is it the right time

15 Sep 2011, 12:31
And what about ARX line ??? That's it ???

Re: a new count down is started, maybe is it the right time

15 Sep 2011, 12:52
What about the ARX? Have you seen the recent prices for the arx boards? Does it tell you something?

← Back to Fantom-G