SonicCell

Changing Performance using korg

Changing Performance using korg

14 Feb 2011, 00:11
Hi,

I need to be able to change performance using a korg synth. In my case its a m50. I am able to change the patches using msb/lsb. What i do is to go to sequence mode and setup different sequences under each song. In one of the tracks i assign the patch msb / lsb (external mode) and set the transmitting channel numeber (for example channel 16 that can be receiving channel for SC) when i inc / dec or go from one sequence to another i'm able to change patches. But can't change performances using the same trick. Anyone has any idea about changing performance patches? Thanks in advance.

Re: Changing Performance using korg

14 Feb 2011, 23:29
To change performance
0) You need to be in performance mode (you can remotely change to this mode with a sysex message )
1) Set the performance change channel (Menu/System/Midi/Performance Control Channel) The default is 16
2) Change the Bank to the performance bank you want (MSB 085 LSB 0=user RAM, 64=internal ROM)
3) Send patch change on the performance control channel

eg Channel 16 (numbers in hex)

BF 00 55 ; MSB Performance
BF 20 40 ; LSB ROM
CF 10 ; performance 16

All the best
Royce

Re: Changing Performance using korg

15 Feb 2011, 01:11
Thanks a lot Royce. I shall definitely try that today..:)

Re: Changing Performance using korg

17 Feb 2011, 00:03
Thanks again :) it worked perfectly. all i had to do was just to assign channel 16 and msb to 85.

← Back to SonicCell