Fantom-G

Roland patches into Ableton as MIDI

Roland patches into Ableton as MIDI

28 Nov 2010, 22:50
Hey guys,

Is there any way to play the Fantom and record it as MIDI into Ableton instead of audio?

Thanksx

Re: Roland patches into Ableton as MIDI

29 Nov 2010, 09:49
Of course you can!!
For that you need:
1- to have the G connected to the computer via USB (or via a MIDI to USB interface).
2- to configure the G as Input in the Ableton's MIDI Devices
3-to configure the G as output in the Ableton's MIDI Devices, in case you want to reproduce your recorded MIDI (most probably ;-))
Make Music and be Happy !!
PauloF

Re: Roland patches into Ableton as MIDI

29 Nov 2010, 11:41
Hey PauloF thanks for your reply,

But in this way will I be able to record the Fantom's amazing patches into ableton as MIDI? Not just use the Fantom as a MIDI controller to control any VSTs I have loaded onto ableton...

Re: Roland patches into Ableton as MIDI

29 Nov 2010, 13:07
Exactly!!
But don't forget that recording MIDI, you can then reproduce your Performance via the G using any of it's sounds, not exactly the ones you have used to record, as as it's MIDI, the patch that you used are completely irrelevant
Make Music and be Happy !!
PauloF

Re: Roland patches into Ableton as MIDI

29 Nov 2010, 13:40
Hey PauloF,

Say I wanted to record a strings loop using the Fantom's 'Sweetest Strings' patch. Would I not be able to record my loop into the MIDI track in Ableton using this patch?
Sorry about this, I'm a complete amateur. Im not very sure what you're saying I wont be able to do, why would the patch I use be irrelevant? What if I want to record a particular Fantom patch into Ableton as MIDI?

Re: Roland patches into Ableton as MIDI

29 Nov 2010, 14:03
Hi Dishan89,
Let me try to clarify,
When recording MIDI, you just record the notes sequence, not the Sound itself, so that's why the patch is irrelevant.

If you want to record a performance that uses a specific Patch, you have to use AUDIO instead.
However, by using AUDIO, you are stuck to that Sound and you can't change it (except adding effects to it).

By using MIDI, you just record the NOTE data (and parameter tweaks too), so when EDITING you can mess around with NOTE positions, change them the way you want, and when reproducing, you can then use any G SOUND you want. Very complex and versatile option.

is it more clear?

I hope so :-)
cheers
Paulo

P.S: Despite the versatility, in all my "productions", when using a DAW, I'm using only AUDIO recording, as that way I immediately get the sound I want, no further tweaks needed. But that's just me ;-)
Make Music and be Happy !!
PauloF

Re: Roland patches into Ableton as MIDI

29 Nov 2010, 14:37
Hi PauloF, thank you so much for your explanation...it did clear a lot of things up for me. I have been recording using audio recording when playing my Fantom into Ableton. However this has given me quite a problem...I cant change the tempo of the audio recording without getting a glitch effect ruining my loop. Ive tried changing warp modes but it still happens.

Do you think you could explain in a bit more detail how I would go about 'Reproducing' : does this option somehow enable me to use any Fantom sound if I record the Fantom note data into Ableton first? If so, this definitely does sound desirable, could you tell me a little more please? : )

Re: Roland patches into Ableton as MIDI

30 Nov 2010, 08:59
@dilshan..

unless you are capable of perfect takes (i am not) then IMO midi is far more useful to home recording than audio recording.. I use audio recording only when i have no choice.

So, as paulof is trying to explain.. midi data is simply note, note timing, velocity and any associated controller information... midi data contains no sound (audio).. look at wikipedia.

So with recorded midi data in a track, in order to playback this track you need to assign a midi output to this specific track... either the pc sound card (which would be the default), or you can use the fantom as the sound module.. if you use the fantom then you also need to assign bank and patch number (so the fantom knows which patch you want)..

bank and patch info is in the fantom documentation...

Re: Roland patches into Ableton as MIDI

30 Nov 2010, 14:37
Hey thank you for your reply. Both of you have answered what I needed to know. I am a little confused as to how to assign the Fantom sound module as the MIDI output and where I'm supposed to assign bank and patch numbers. I use Ableton, do you happen to know what I have to do?

If you could also tell me where in the Fantom documentation it will tell me how to do this I would be very grateful, as Im not even sure what this process is called exactly.

Thanks

Re: Roland patches into Ableton as MIDI

30 Nov 2010, 14:53
see page 295
Fantom G & X7, Motif XS6, M3, V-synth, JP8000, M1, Wavestation, Radias, Nord Lead 2X, Karma, Snow, electribes and other groove boxes.

Re: Roland patches into Ableton as MIDI

4 Dec 2010, 14:12
Hi there, thank you all for your replies. Basically, I have managed to install the Fantom VST editor into Ableton. It does work. However my problem is this:

My Fantom is connected to the computer (both MIDI and audio) via my external sound card (M-audio Fast track pro). However, when I leave it at that, the Fantom Editor is unable to get the bank/patch data from the Fantom. So I have to connect the Fantom to the computer via a direct USB for it to actually work. This would be fine, but the problem is that when the soundcard USB and the Fantom USB (going directly from the keyboard to the computer) are in together, Ableton doesnt receive MIDI signals at all from the Fantom. Is there any way for the editor to be able to get bank/patch data without there having to be a direct USB link between the keyboard and the computer. If not is there some other way? What should I do?

Thanks xx

← Back to Fantom-G