How to split the keyboard on my v-synth v2

Welcome to the Clan Paul.

Keyboard splits are called zones on the V-Synth and this is something I first looked at yesterday, so I am not an expert but this should help. Go to:
PRO EDIT
Choose Com
Choose Keyboard
At the bottom of the screen is the zone.
Choose Edit
Choose Split
Now you can set the top of the zone range. It appears that zone 1 starts at the left end of the keys and they move sequentially to the right. That is why there is just one setting for each zone, the maximum range. Follow these steps and you will quickly know more than me about zones.

Hope this gets you started.
-Rodan

On the main screen of the patch, you should be able to also hit the menu button on the touch screen (top right) it should bring up a new menu in which you have the option to split the zones up. If you do it that way though I'm pretty sure you can only split the keyboard up between lower and upper tones. You'll want to get more detailed in the zone setup for multiple sounds across different key splits when editing or creating new tones.

In fact I also used zones to split the keyboard in a couple of Patches that I created, and on the V-Synth 2.0 that is the only way. As I have a XT, I rather configure my splits on my PCR-500 Midi Controller, which gives me much more flexibility than zones, as this way I can set any split on the fly and enables me to connect each split part (Lower/Upper) to a specific MIDI channel/different Part.