Fantom-S and Fantom-X

Jumping Aftertouch

Jumping Aftertouch

29 Jun 2008, 16:04
Hi, All!

I've owned my X8 for about 18 months now, and am still constantly learning new things - one of the last items on my list is 'Aftertouch'.
I've read all the posts here, and can get aftertouch to work smoothly in the patch 006 X Brs Sect 1 by using the D-beam or Mod Wheel (D-Beam ->SYS-CTRL1 (set to Modulation) -> Aftertouch). But when I switch it to SYSCTRL2 (set to Aftertouch), I have the same problem desribed by achyeboah - a sudden increase in volume instead of a smooth increase. A huge amount of pressure is required on the keys as well, to the point where my hand and fingers hurt after a while. I have the system aftertouch set at 100, and the patch aftertouch sensitivity set to +63. I've tried duplicating the aftertouch control in 2 additional unused CTRL slots as well, but this just has the effect of increasing the loudness even more once the 'step' kicks in! It seems as though the device in the keys which detects pressure is not woking correctly (velocity sensing works fine). Is it a resistive or piezo sensor, or is it optical? Can it be adjusted by mechanically adjusting something under the keybed?

Thanks, and the Roland Clan Forums are great - I've learned a huge number of tips and tricks from everyone!

Re: Jumping Aftertouch

29 Jun 2008, 20:00
I don't know if this is a 'feature' of roland boards but both my Ex X6 and my current V-Synth has it.

I did own a Korg Triton Extreme and that had very sensitive and progressive aftertouch which was a joy to use and added so much.

You could fade strings in nicely with it, but Roland boards just seem to need so much pressure to trigger the aftertouch and then it seems to jump to a high value immediately.

I have contemplated getting rid of my GT because of this which is a shame because it sounds great but as a controller is lacking.

Re: Jumping Aftertouch

30 Jun 2008, 06:05
Hello daddio57. I came to the conclusion that using the keybed aftertouch wasn't much help for nice and progressive aftertouch techniques. I just use it for on-off settings, like the rotor control in B4Real does.

For smoother control, the DBeam or assignable knobs may be the way to go, although this requires that you move a hand from the keyboard.

Cheers.

Samuel
I bring more than a song

FANTOM X Aftertouch Fix

8 Feb 2009, 20:52
Thanks for the replies and sharing your ideas.

I finally took apart my X8 to see how the aftertouch mechanism works. Basically, it is a piezo-resistive strip that changes resistance depending upon the amount of pressure placed upon it. There are 3 leads at the left end of the keybed, although 2 of them are electrically the same, so if you hook an ohm-meter up to 2 of the leads, and lean on ANY of the keys (its monophonic aftertouch), you'll see the resistance change. The reason why the aftertouch is so stiff on the X is that the key stops moving downward before the bottom of the key even contacts the strip on the aftertouch rail (located near the front of the keybed). So you actually are bending the keys in order to get the aftertouch to kick in. My solutions was: 1. to remove all of the keys (carefully unlock the back of each key first). 2. Add a strip of self-adheshive felt (about 1/8" thick) over top of the existing material on the aftertouch rail. 3. Re-assemble.
This worked like a charm, without affecting any other aspects of the keybed action (key dip was still within the normal piano range). Now much less pressure is required before the aftertouch effect kicks in, and even though it rises quickly from min to max over a short range, with a little practice it is reasonably controllable.

Re: Jumping Aftertouch

9 Feb 2009, 05:41
Nice to hear. I'm just wondering, can you post some pictures?

Alternatively, would it have been possible to raise the strip on the aftertouch rail? Thanks.

Samuel
I bring more than a song

Roland Fantom x aftertouch

9 Feb 2009, 22:20
Hey guys...I also have the problem of key aftertouch with my Rolands boards...both the XP 80 and my Fantom x6. I also own a korg karma, yamaha Ex5 and a kurzweil...all of which give me good response while playing with both hands on the keyboard. I'm very disappointed in Roland for this oversite with their keyboards and I will NOT buy another Roland until they fix this ! I'm often playing a EP sound with my left hand and a lead synth or sax sound with my right hand and need the aftertouch without breaking my fingers to get even a small amount of modulation. Two things we keyboard players.... MUST have......great sounds and we must be able to play them with expression from the keys.

Many thanks to the Roland Clan and all their help !!

Doc3436

Aftertouch Mods

16 Feb 2009, 18:59
Hi, Samuel (achyeboah)!

Unfortunately, the rails are made out of 1 piece of stamped steel, so you can't alter the height of the metal 'flat' that the aftertouch strip rests on. Other options I considered were to remove the aftertouch strip with original felt attached, and then glue some type of shim strip to the rail, then put the aftertouch strip back on top of this; or, move the aftertouch strip to the front rail, which is really the key-stop rail (but this may just be for the white keys only); or, replace the aftertouch strip with a more sensitive one with a more responsive range such as found on K2600's.

Yes, I will post pictures, hopefully next weekend - I took about 20 or so during my modification procedure, which I now call the 'Aftertouch Attitude Adjustment'. Do I need to include lots of warnings and disclaimers, or do people generally understand that any custom mods they do are done entirely at their own risk?

Thanks!
Gary.

Fantom X8 Aftertouch Mod Tutorial

22 Feb 2009, 15:22
All,

I've posted a tutorial for my aftertouch mod procedure with pics in a zip file under Fantom-X Tips and Tricks.

Gary.

Re: Jumping Aftertouch

24 Feb 2009, 06:04
Nice. Thanks for the pixes.

Samuel
I bring more than a song

Re: Jumping Aftertouch

20 Sep 2010, 05:36
This linkk seem to be broken.Anywhere I can download the aftertouch mod procedure + photos ?? My hand hurts even looking at my X6.Please hekp.

Re: Jumping Aftertouch

20 Sep 2010, 05:47
Wholeheartedly agree with you on this.My brand new x6 is sitting here covered up 'cause my hand hurts just looking at it.It's such a shame.You would think that after all these years in the biz,Roland could screw up like this.Sorry for the 'rant' but it cost me hard earned cash. Franticly searching for a FIX for this.Anyone got anything RECENT ?

Re: Jumping Aftertouch

20 Sep 2010, 05:59
I've got the zip that I downlaoded a while ago. It's all still Gary's work. Attachments seem to be off, so if you give me your e-mail I'll forward it on.

Andy
Andy

← Back to Fantom-S and Fantom-X