Tempo locking (clock sync) from Logic pro to FG
1 Sep 2010, 06:58Ok conundrum, I Haz it.
I am running a M-Audio Profire 610 interface connected to my iMac running Logic Pro 9. I have firewire between the interface and the Mac. I run audio to and from my FG6 into the interface via SPDIF. I also have MIDI Out from the FG6 to the Profire 610. MIDI out from the Profire goes to my M-Audio Axiom Pro 49 controller's MIDI IN, MIDI out from the Axiom goes to MIDI IN on the FG6.
Everything works fine for using the FG6 and playing software instruments in logic and omnisphere and trillian from either the FG6 or the Axion Pro However i run into the problem with motion based patches on the FG6 whenever I try to get them to synch to Logic's tempo. It doesn't happen. I mean if I set the temp on the FG6 internally to the same as in Logic it 'sort-of' works but if I am like a half second off on note on then the two tempos are now off and doesnt sound right so thats not a real viable option.
I think I must have something goofy somewhere in the chain or whatnot I dunno.
To recap my connections:
iMAC > interface = firewire
FG6 MIDI OUT > interface MIDI IN
FG6 SPDIF OUT & IN > interface SPDIF IN & OUT (for audio and loading samples into FG6)
Axiom Pro 49 MIDI OUT > FG6 MIDI IN (FG6 in software through mode)
interface MIDI OUT > Axiom Pro 49 MIDI IN.
If I knew how to post a pic I'd upload a diagram.
I am running a M-Audio Profire 610 interface connected to my iMac running Logic Pro 9. I have firewire between the interface and the Mac. I run audio to and from my FG6 into the interface via SPDIF. I also have MIDI Out from the FG6 to the Profire 610. MIDI out from the Profire goes to my M-Audio Axiom Pro 49 controller's MIDI IN, MIDI out from the Axiom goes to MIDI IN on the FG6.
Everything works fine for using the FG6 and playing software instruments in logic and omnisphere and trillian from either the FG6 or the Axion Pro However i run into the problem with motion based patches on the FG6 whenever I try to get them to synch to Logic's tempo. It doesn't happen. I mean if I set the temp on the FG6 internally to the same as in Logic it 'sort-of' works but if I am like a half second off on note on then the two tempos are now off and doesnt sound right so thats not a real viable option.
I think I must have something goofy somewhere in the chain or whatnot I dunno.
To recap my connections:
iMAC > interface = firewire
FG6 MIDI OUT > interface MIDI IN
FG6 SPDIF OUT & IN > interface SPDIF IN & OUT (for audio and loading samples into FG6)
Axiom Pro 49 MIDI OUT > FG6 MIDI IN (FG6 in software through mode)
interface MIDI OUT > Axiom Pro 49 MIDI IN.
If I knew how to post a pic I'd upload a diagram.

