Fantom-S and Fantom-X

Have Any One Ever Used A Fantom X6 With An Mpc 1000

Have Any One Ever Used A Fantom X6 With An Mpc 1000

4 May 2010, 08:09
If anyone have ever used a fantom x6 and an mpc 1000 could you let me know what settings to have them on because every time i record in track 1 of the mpc when i switch the mpc to track 2 when i change the patch in the fantom the patch that i recorded in track 1 is now on whatever patch i got the fantom now. My problem is that i would like to record a patch on track 1 in the mpc and when i switch to track 2 use a different patch in track2 than i used in track 1 but keep the patch i recorded in track 1. Please help been looking for the answer to this problem for two weeks

Re: Have Any One Ever Used A Fantom X6 With An Mpc 1000

7 May 2010, 09:28
I dont have an mpc now,but i used one for many years.I will try to help.Do you have "local switch" off in the fantom?If not go to system,sound,local switch,& turn it off.Hit system write.See if that does it.

Re: Have Any One Ever Used A Fantom X6 With An Mpc 1000

7 May 2010, 11:52
Sounds to me like your in single mode on the Fantom. You need to switch to Multi mode. This is where you'll see the mixer on the screen. From there, hit F2 I think, to go into the list of parts. It'll show you what patch is assigned to each of the 16 parts and you can change them to the sounds you want to use. Then each part will have it's own Midi chanel so that you can record the first patch, say a bass sound, on track one of the MPC. Then you can record a piano sound on track two of the Mp (controlling the piano sound on the fantom in the second part on the second Midi chanel.) Hope this helps.
wudsiba
Fantom X6
Audio exp.

← Back to Fantom-S and Fantom-X