Fantom-G

Combining G with Motif XS Rack

Re: Combining G with Motif XS Rack

1 May 2010, 13:02
anyone have any suggestions as to how I could take the midi events from the arps generated by the motif Rack XS and record them into the fantom g's sequencer? i know how to record the actual audio, but what if I just want to record the midi events (exactly what the arp is doing) and then manipulate the midi notes (etc...) from within the fantom g sequencer?

i could also use this to take the arps from the motif and use the fantom g sounds to play the arps? right?

I mean i could save the midi data as a pattern or as an arpeggio in the fantom g arp section? right?
Can You Touch The Apex

Re: Combining G with Motif XS Rack

1 May 2010, 13:43
"...Suggestion" -> record these arps in your song on the motif xs andsave them as a midifile ?

"...i could also use this to take the arps from the motif and use the fantom g sounds to play the arps? right? ..." -> yes, althought the motif uses some special programmed velocity or pitch switching in the patches that may not correspond to the Fantom G sounds, so don't expect it to be straight forward.

"I mean i could save the midi data as a pattern or as an arpeggio in the fantom g arp section? right? " -> yep you can import this to a phrase or a arp in the Fantom G. Currently I'm not using the FantomG arps but I thought these can not hold cc messages. Only note values.

Re: Combining G with Motif XS Rack

1 May 2010, 14:29
I can't record them in the song on the XS cause I don't have the XS (keyboard), I have the XS Rack.


what do you mean xx messages? and what does your next to last sentence mean.
"Currently I'm not using the FantomG arps but I thought these can not hold cc messages"

what again are cc messages? (I think I know),

would they be important for what I am trying to achieve?
Can You Touch The Apex

Re: Combining G with Motif XS Rack

1 May 2010, 14:33
can't record them in the song on the XS cause I don't have the XS (keyboard), I have the XS Rack. -
-> sorry I didn't try it in another way, can't help you with that.


what again are cc messages? (I think I know)
-> like modulation etc ...

would they be important for what I am trying to achieve?
-> you are talking about midi events , so I asumed yes.

Re: Combining G with Motif XS Rack

1 May 2010, 16:45
yes midi events like the notes that the arps generate. not the modulation and all that...
Can You Touch The Apex

Re: Combining G with Motif XS Rack

3 May 2010, 02:16
*****************NEW ISSUE/CONCERN/PROBLEM!!!!!!!!!****************

Having just a little bit of trouble with something.

I understand how to get the ARPS Midi Data into the Fantom G sequencer. But here is where the problem comes in.

The fantom G has an internal parts section of the sequencer and an external parts section of the sequencer.

Even though I am working with the external parts (since I'm triggering/using the RACK XS) it is still triggering sounds on Midi Channel/Part of the internal sequencer.

For example, I am working with a multi and I'm on part to of the multi and I have the arp set up and have it is triggering the sound on part 2 of the RACK XS multi... the only problem is that it is also triggering sound from the instrument on part 2 of the internal parts of the FANTOM G.

It's all based on the midi channel that is selected when I go into the Multi edit screen choose part 2 and then go to voice. there is an option named "receive ch" which ever number I select here it triggers notes from that instrument/channel/part of the internal sequencer ALONG with the instrument/channel/part from the XS rack...

and it also only does it when I turn the arp switch/ audition button on... if it's off I don't think it triggers that internal midi part on the Fantom G.

HELP. this is very frustrating...

if it helps I can start a new thread... I'll wait and see if someone responds.. .kinda hard to pick up and go with a thread this old and the subject kinda changing...
Can You Touch The Apex

Re: Combining G with Motif XS Rack

3 May 2010, 18:05
I'm going to post this in multiple places in this forum because there is more than one instance where the information is needed... so sorry in advance for the double post.

OK. guys this is what I've figured out. I am just simply trying to record the midi data that the Rack XS is sending when I trigger an ARP to play. When I record the Midi Data that the Motif Rack XS is sending out for some reason it is recording the data to the INTERNAL, EXP 1, EXP2, & EXTERNAL Midi Channel/part 2.

I am not sure why it is doing this, but I figured out that it like this. After I recorded the midi the Arp Midi Data I went into the microscope and sure enough it says that the midi data was recorded on INT, EXP1, EXP2, and External... so that is the reason that it kept on playing the midi channel 2 (internal) when I just wanted it to play the midi channel 2 (external)... I guess if I had an expansion 1 or 2 ARX card it would be triggering midi channel 2 on that as well.

I'm trying to figure out what's causing it to trigger all the mixers(int, exp1, exp2, ext)...
(i'm not telling it too)... And I'd rather not have to go in everytime and change the channel when I record... (selected all sources/part group, and telling it to just play it on External midi channel 2 or Internal midi channel 4)...

does anyone know how to tell the Fantom which mixer to record the data too? does that have something to with the OUTPUT Destination? surely not... since we the problem is not at the output stage, but at the input stage? it's actually being recorded to every place where there is a midi channel 2 reference in the Fantom G.

So when I record the Arp Data from the Rack XS, and it is outputting the data on channel 2 it shouldn't send the information to all the mixers (int, exp1, exp2, ext...) it should only send it to the one that I am triggering it from. that's the reason for selecting the track...right?
Can You Touch The Apex

← Back to Fantom-G