Fantom-S and Fantom-X

USB connection not working for Roland X6

USB connection not working for Roland X6

12 Jul 2009, 00:27
Hi i just recently bought a used Roland Fantom X6...Only problem is that the USB connection is not working....

My X6 is currently running version 1.04.

I tried running the USB test and even though both ends of the cable are plugged in, it still says disconnected....Im on Windows Vista 32 Bit....and i know its not the cable because it worked on my other keys....please anyone help.

Re: USB connection not working for Roland X6

12 Jul 2009, 04:08
Would I upgrade it straight to Version 2.10, or would i have to install 1.07...then 2.01 and so on?

The thing is, I need the USB connection to be able to update my version, so that really wouldn't help fix my problem?

ANy other suggestions?

Re: USB connection not working for Roland X6

12 Jul 2009, 04:11
You cannot install version 2.0 or 2.10 without Roland's special upgrade card. So far, you can only upgrade to 1.07.

Re: USB connection not working for Roland X6

12 Jul 2009, 04:15
But how would I do so if I'm not getting a USB connection and don't have a storage card for it?

Please any help is appreciated. I even made sure the USB mode was on storage too, so I'm starting to think it may be a fault USB chip or something in the back of the X6.

Re: USB connection not working for Roland X6

12 Jul 2009, 04:53
Maybe you should check your Fantom-X USB driver installation in your computer. Perhaps uninstall and reinstall it, then try again. Also, make sure you connect your X6 directly to a free USB port, not a USB hub. Also, it would be useful to try the Fantom-X USB storage mode with another computer, if you have one at your disposal.

Re: USB connection not working for Roland X6

12 Jul 2009, 15:15
When i try installing the driver, my computer does not even read the Roland X6?

What do i do now?

Re: USB connection not working for Roland X6

12 Jul 2009, 16:02
I suppose you install your USB driver with Fantom-X disconnected, right? At least this is to be done with Windows.
First uninstall the previous installation, restart the computer, then reinstall the driver.
Then connect your Fantom-X using USB storage mode.

Again, make sure you're connecting your Fantom-X in a dedicated USB port, not a USB hub.

Oh, and as always in situations like this, check the whole procedure with another USB cable as well, just in case... ;-)

Re: USB connection not working for Roland X6

12 Jul 2009, 19:38
To tell the truth, I thought at first it was cause I didn't even install the driver, but even when trying to install it, my computer does not read the X6..It is detecting my thumb drives, my Korg pa800, and any other usb devices..

Yes I have tried installing it like it says with my roland x6 off and then connecting it, but still nothing...I'm connecting it directly into a USB port on my laptop....I'm almost certain it is not the cable because it works with my PA800...

The seller assured me that nothing is wrong with it, so im thinking it may be my computer or a fault with the X6 cause my computer is pretty new and has always worked with USB devices.

Re: USB connection not working for Roland X6

12 Jul 2009, 20:49
I seem to get it to work now but only sometimes, it's still not 100%..

I've tried that Japan Roland site, but it seems to be down....Does anyone here have the link to the Version 1.07?

How can I get the version 2.10?

Re: USB connection not working for Roland X6

6 Oct 2009, 04:17
I never got my Fantom X working in USB-midi mode.

But maybe there is hope:

while having another apparently unsolvable USB problem on my computer (Steinbergs latest eLicenser (USB key for Cubase 5) driver did not work at all) I found a little freeware tool called "USB troubleshooter" by Bjoern Bastian. After having run this everything is all right with the eLicenser.

As soon as possible I will check out the USB midi connection Fantom X -> computer and I hope that it will work also.

I will report as soon as possible.
My gear:

Roland Fantom X6,
Roland XP-30,
Cubase 4
Hypersonic 2
G-media M-Tron
Virtual guitarist 2
Cort CJ5X with Taylor pickguard

Re: USB connection not working for Roland X6

1 May 2010, 04:53
I haven't been able to use my X6 in usb mode for a couple years. I gave up trying to figure it out. Can't install drivers with the usb cable disconnected because it's supposed to recognize the X6 and start the install. Now that I really want to use it again I figure it's time to see if I can find a service tech..

Re: USB connection not working for Roland X6

1 May 2010, 15:23
Did anyone try a factory reset,then try the usb function?I was just havig problems with mine too until i did a factory reset.Now it all works fine.

← Back to Fantom-S and Fantom-X