Fantom-S and Fantom-X

FX6 LCD Screen problem....help!!!!

FX6 LCD Screen problem....help!!!!

30 Apr 2004, 09:31
Please read.....


Just two weeks ago I became the proud owner of a Fantom X6. Yesterday I got home from college and got prepared to go to a rehearsal where I am the main keyboardist.When I went to practice I plugged in my X6, hit the power button and noticed that the LCD screen was still black. My first reaction was not to flip out. But on the second and third attemp the screen was still black, so I just turned the power off. This is only my second workstation and I am desperately trying to figure out what went wrong. BTW after a while I turned X6 on again and i could see the LCD display faintly. I tried to adjust the contrast and the screen got only a few shades brighter. I could see well enough to do a factory reset( I was completely out of any other ideas).It still didnt help. This is the best keyboard I have ever owned and I am a BIG roland fan but this is very disappointing and confusing..What went wrong? I have not bumped or dropped the machine in any way and it is always stored in a protective case. Can someone help me ? I would greatly appreciate it.

Thanks

-John

Re: FX6 LCD Screen problem....help!!!!

30 Apr 2004, 11:09
This is (most likely) a well known and well documented occurence with Roland 'Big Screen" keyboards. In fact, if you look carefully in the X documentation which came with your keyboard, you will see a reference to this directly from Roland. Please forgive that I cannot remember exactly where I read it, but it was either in the manual, or with a paper attachment (leaflet) that supplimented the manual.

The bottom line is...depending on "environmental conditions" the screen may require several minutes of time before initializing. No more information regarding which environmental conditions need to be in place before this occurs...but several posts on the V-Synth boards, and here in the past, have indicated that temperature is a factor. Still....I have had this same thing happen to me frequently on my V synth, and I live in San Diego CA USA which has about the most even and pleasant climate of any city in the world.

Leave your unit powered on for several minutes (Less than 10) and the screen should come to life. I needs to "warm up" or some equivilent to that. You'll notice that the keyboard will be playable and fully functional after the ususal boot up routine...but the screen will stay dark for a bit. Look carefully through your documentation and you will see the reference to this, advising you that this is not considered by Roland to be a malfunction. I must say that even though I have been very concerned about this behavior with my V synth, it has consistently done this for over a year now, with no ultimate malfunction.

OR.....return it if think that is best....but you may very well have this again on the new unit. It is something that I have prominently seen posted over the FantomS/Vsynth life span. If you search these forums, you will find others who have posted the exact same findings, and much discussion about it.

Thanks,

Ron

Re: FX6 LCD Screen problem....help!!!!

30 Apr 2004, 12:30
I feel for you Muzik. Same problem with my FS since day one. I actually did return my first one because the delay seemed extraordinary and happened every time I powered up. My FS seems to do it periodically now, but to be honest, I don't even know how often it does because now I generally switch on the FS and walk away for a few minutes to let it do it's thing. Remember, disappointment is all about expectations. If you stop expecting it to pop right on, it probably won't disappoint you.

← Back to Fantom-S and Fantom-X