SysEx data dump requests for Roland Fantom-S, Fantom-X and Juno-G----
Thanks Artemiy- I downloaded this folder and all of it's midi files, how would I use these midi files in the MPC to recall the sequences?
Usage instructions
The basic steps of recording a SysEx data dump into the sequencer is as follows:
1. Load the desired dump request file into the sequencer. (Into the MPC? this is my main sequencer)
2. Press [record], and choose [Track 1] as record destination. (On the MPC ?)
3. Press [play] and record four bars (measures) if requesting a rhythm set, one bar in any other case. If dumping a whole performance, 8 bars need to be recorded if you have a single rhythm set, and about 32 bars if you have rhythm sets assigned to all 16 parts. (On the MPC?)
4. In microscope mode, make sure that a series of SysEx messages exists on Track 1.
5. Switch to another performance, patch, rhythm kit, chord form, e.g. - reset the data you dumped to perform the check of the recorded dump
6. Rewind the sequence to the first measure and play it all back. You should now see (and hear) your data back in the temporary location from where you dumped it.
7. Save this sequence as a Standard MIDI File (SMF), type 0 or 1. You may wish to erase Track 2 (the dump request) before saving.
